GTP HybridPower Carbon Composite Heald Frame Aluminium Carbon Hybrid 850-1000 rpm for Picanol OMNIplus 800 Looms

The GTP HybridPower is an aluminium-carbon hybrid heald frame built as a factory-fit replacement for the Picanol OMNIplus 800. It is aimed at mills running ultra-high-speed, wide-width weaving where a conventional frame starts to show its limits: the aluminium profile carries the structural load, and carbon-fibre reinforcement is embedded where bending stress is highest, so the frame keeps its figure at speed instead of flexing and springing back.

That combination is what keeps frame vibration down. At 850-1000 rpm on a wide loom, every extra gram in the moving mass and every degree of flex turns into heald wire wear, mis-timed sheds and edge defects. The HybridPower holds stable shedding across the full width, up to 340 cm, so the shed stays clean from selvedge to selvedge.

The R-Flex corner joints are the second half of the story. They absorb the reversal impact at each end of the stroke instead of transmitting it into the frame, which cuts the knocking noise on the loom floor and reduces fatigue loading on the joints and on the heald wires.

Product name: GTP HybridPower Carbon Composite Heald Frame Aluminium Carbon Hybrid 850-1000 rpm for Picanol OMNIplus 800 Looms

Frame type: aluminium-carbon hybrid heald frame, carbon-fibre reinforced aluminium profile

Working speed: stable at 850-1000 rpm

Weaving width: up to 340 cm

Compatible looms: Picanol OMNIplus 800 air-jet weaving machines

Corner joint: R-Flex flexible corner joints for lower impact noise and longer joint life

Best for: high-speed, wide-width fabrics where frame vibration and shed timing are critical

Typical users: high-speed air-jet mills, technical fabric weavers and spare-parts distributors

Please confirm your loom model, reed space and frame width with our sales team before ordering so that we can match the frame to your machine.

Aluminium profile with embedded carbon-fibre reinforcement for stiffness at minimum weight

Stable shedding at 850-1000 rpm on weaving widths up to 340 cm

Minimum frame vibration keeps shed timing consistent across the full width

R-Flex corner joints reduce impact noise and fatigue on joints and heald wires

Video outgoing inspection recorded for every batch, one year warranty on manufacturing defects

Aluminium profile checked for straightness and wall thickness before carbon reinforcement bonding

Carbon-fibre reinforced sections inspected for bond integrity and surface finish

Corner joints and side connectors dimension-checked for drop-in fit on the OMNIplus 800

Frame run-out verified so the shed geometry stays consistent at high speed

Video outgoing inspection recorded for every batch, and the video can be sent with the shipping documents

One year warranty against manufacturing defects; damage from wrong installation or running beyond the rated speed and width is excluded

Minimum order quantity: from 30 pieces

Delivery lead time: 7-20 days after order confirmation

Neutral export packing by default; private-label and custom packing available on request

Shipping: DHL / FedEx / UPS express, air freight or sea freight

Payment terms: L/C, D/A, D/P, T/T, Western Union

Export documents: commercial invoice and packing list supplied with every shipment

Q1: Which looms does this frame fit?

A: It is built as a factory-fit frame for the Picanol OMNIplus 800. Please send us your loom model, reed space and required frame width so that we can confirm the side support and mounting layout before you order.

Q2: What is the difference between this and a standard aluminium frame?

A: The HybridPower uses an aluminium profile with embedded carbon-fibre reinforcement, so it is stiffer in bending without adding weight. That extra stiffness is what holds shed timing on wide looms at 850-1000 rpm.

Q3: What weaving width can it handle?

A: Frames are built for widths up to 340 cm. Please state the exact reed space of your loom when inquiring.

Q4: What is the minimum order quantity and the lead time?

A: MOQ starts from 30 pieces and the delivery lead time is 7-20 days after order confirmation, depending on frame width and quantity.

Q5: Is the frame inspected before shipment?

A: Yes. A video outgoing inspection is recorded for every batch and can be sent with the shipping documents so you can check the frames before they leave the workshop.

Q6: What warranty do you offer?

A: One year warranty against manufacturing defects. Damage caused by incorrect installation or by running the frame outside its rated speed and width is not covered.

Q7: Do you support neutral or private-label packing?

A: Neutral packing is standard. Private-label carton marking and artwork are available on request; please confirm details with sales before production.