ITEMA R9500 Rapier Head Sending Receiving Gripper Set OEM Dimensions Weft Transfer Replacement Part

This is the rapier head set for the ITEMA R9500 high-speed rapier loom, supplied as a matched sending and receiving gripper pair. Both heads are made to OEM dimensions, so they mount on the rapier tape and the receiving seat as the original does, with no loom modification and no re-setting of the transfer geometry.

The sending gripper picks the weft at the presenting side and the receiving gripper takes it at the far side, which means the two parts have to be matched to each other: transfer depends on the clamp faces meeting at the right point, at the right height, on every pick. Supplying them as a set keeps that match, which is why worn rapier heads should be replaced in pairs rather than one side at a time.

Worn heads show up as weft breaks at the transfer point, double picks, damaged yarn at the shed edges and cloth faults near the selvedge. On a high-speed rapier loom running wide styles, that is a direct loss of efficiency, so keeping a spare set on the shelf is standard practice.

Product name: ITEMA R9500 Rapier Head Sending Receiving Gripper Set OEM Dimensions Weft Transfer Replacement Part

Set contents: sending gripper (rapier head) + receiving gripper

Compatible looms: ITEMA R9500 high-speed rapier looms

Dimensions: OEM dimensions, direct replacement

Installation: no loom modification required

Function: weft yarn transfer at the sending and receiving sides of the shed

Typical users: weaving mills, rapier repair workshops and spare-parts distributors

Please confirm your loom model, weaving width and the tape position with our sales team before ordering, so the correct head set is shipped for your R9500.

Matched sending and receiving gripper pair, supplied as one set

OEM dimensions for direct fit, no loom modification

Clamp faces controlled for a clean weft transfer at high picking speed

Replacing both sides together keeps the transfer geometry matched

Video outgoing inspection recorded for every batch, one year warranty on manufacturing defects

Sending and receiving heads checked as a matched pair before packing, not as loose parts

Clamp faces and guide surfaces dimension-checked against the OEM reference for drop-in fit

Transfer height and gripper alignment verified, so no re-adjustment is needed at the loom

Industrial-grade material selected for the high-speed, high-cycle duty of R9500 rapier picking

Video outgoing inspection recorded for every batch, and the video can be sent with the shipping documents

One year warranty against manufacturing defects; damage from wrong installation or running outside the intended loom application is excluded

Minimum order quantity: from 2 sets

Delivery lead time: 7-20 days after order confirmation

Please state your loom model, weaving width and quantity in your inquiry

Express shipping: DHL / FedEx / UPS, with air freight and sea freight for larger orders

Neutral export packing by default; private-label packing available on request

Payment terms: L/C, D/A, D/P, T/T, Western Union

Export documents: commercial invoice and packing list supplied with every shipment

Q1: Can I buy only the sending gripper or only the receiving gripper?

A: This listing is the matched set. Single-side supply can be discussed on request, but replacing the pair is recommended because the transfer geometry is shared between the two heads and mixed wear causes weft breaks at the transfer point.

Q2: Does the head set need any loom modification?

A: No. Both heads are made to OEM dimensions and mount on the original fixing points, so no re-machining or re-adjustment is required.

Q3: Are these original ITEMA parts?

A: No. They are aftermarket replacements made to OEM dimensions, interchangeable with the original parts but not ITEMA-branded.

Q4: What is the minimum order quantity and the lead time?

A: MOQ is 2 sets and the delivery lead time is 7-20 days after order confirmation, depending on quantity.

Q5: Is the set inspected before shipment?

A: Yes. A video outgoing inspection is recorded for every batch and can be sent with the shipping documents.

Q6: What warranty do you offer?

A: One year against manufacturing defects. Damage caused by incorrect installation or by use outside the intended loom application is not covered.

Q7: Do you support neutral or private-label packing?

A: Neutral packing is standard. Private-label carton marking and artwork are available on request; please confirm details with sales before shipment.