FUNCTION CONTROL BOARD YHE-0215 J9206-02800-0A Toyota JAT-710 JAT-810 Panel Part

Product Overview

Function panel control board to original number J9206-02800-0A for Toyota JAT-710 and JAT-810 air jet looms. Item code YHE-0215.

The 710 and 810 panels carry several boards in the same housing, and this is the one that drives the function selections and their indicators. Its failures are easy to misdiagnose because the loom keeps weaving: an indicator that stays lit when the function is off, a function that cannot be selected at all, one group of settings that behaves differently from another, or a panel that boots normally on some days and shows nothing on others. Where the panel board handles key input and the interface board carries signals to the machine, this board decides what the selected function actually does — which is why a fault here looks like a settings problem rather than a hardware one.

Applications & Compatibility

Supplied to weaving mills and loom electrical teams maintaining JAT-710 and JAT-810 control panels.

• Compatible with: Toyota JAT-710 air jet loom
• Compatible with: Toyota JAT-810 air jet loom
• Original part number: J9206-02800-0A
• Our item code: YHE-0215
• Panel board: J9206-02200-0B (YHE-0201)
• Interface board: J9206-02600-0A (YHE-0203)

These three boards sit together and their symptoms overlap, so identify by the number printed on the board edge rather than by position. J9206-02800-0A is a different item from the 02200 and 02600 boards, and revision suffixes within the same number are not interchangeable either. If the print is obscured, send a photo of the board face with the connector side visible.

Quality Standard

• Board revision and connector layout matched to J9206-02800-0A.
• Function selection channels tested one by one, including indicator drive.
• Start-up behaviour verified over repeated power cycles, since intermittent boot is a common field complaint.
• Stored settings checked to survive a power cycle after configuration.
• Conformal coating against lint and humid cabinet air.
• Anti-static bag with foam in a rigid carton, connectors stress-protected.
• Warranty covers manufacturing defects (case-by-case evaluation). Static damage, reversed connectors and liquid ingress are excluded.

Specifications

Order & Shipping Information

• Minimum order quantity: starting from 2 pieces.
• Sample order is acceptable for evaluation on the loom.
• Stock items ship within 5 working days after payment confirmation.
• Neutral export packaging by default; private-label and custom packaging service available.
• Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
• Complete export documents including commercial invoice and packing list will be supplied.
• We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions

Q1: Which of the three panel boards is this one?
This is J9206-02800-0A, the function control board. Key input is J9206-02200-0B and the machine interface is J9206-02600-0A. Identify by the number on the board edge.

Q2: An indicator stays lit when the function is off. Board or display?
If the function itself is off and only the indicator is wrong, the drive side of this board is the likely cause. Check the connector first, then the board.

Q3: The panel boots on some days and shows nothing on others. Why?
Intermittent start-up usually means a marginal supply or a connector joint. Confirm the supply rails are stable before replacing a board.

Q4: Do settings need re-entering after replacement?
Yes where the loom stores settings on the board. Record your current values before removing the old unit — a photograph of the setting screens is enough.

Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Static damage, reversed connectors and liquid ingress are not covered.