DISPLAY CABLE YHE-0219 64520-01000 Toyota JAT-710 JAT-810 Loom Panel Connection Part

Product Overview

Panel display cable to original number 64520-01000 for Toyota JAT-710 and JAT-810 air jet looms. Item code YHE-0219.

Display cables fail in a way that imitates a failing display. The conductor breaks inside an intact sheath, usually where the cable flexes at the panel hinge or rubs along the frame, so the fault appears and disappears with movement: a screen that goes blank when the panel is opened, characters missing or scrambled on part of the display, a display that works after the loom has been left alone overnight and fails once it is running, or a screen that flickers in step with the machine's vibration. Because a replacement display is far more expensive than a cable, the wiggle test comes first — flex the cable gently along its run with the loom powered and watch whether the display changes.

Applications & Compatibility

Supplied to weaving mills and loom electrical teams maintaining JAT-710 and JAT-810 control panels.

• Compatible with: Toyota JAT-710 air jet loom
• Compatible with: Toyota JAT-810 air jet loom
• Original part number: 64520-01000
• Our item code: YHE-0219
• Companion cable: display cable for the second position is a separate item

Confirm 64520-01000 on the old cable's label before ordering, and check the length and connector type at both ends — these looms use more than one display cable and the connectors are not always the same. If your machine is a JAT-600 rather than a 710 or 810, tell us before ordering so the correct cable is supplied.

Quality Standard

• Conductor count and pin assignment matched to 64520-01000.
• Stranded conductors chosen for flex life at the panel hinge, where the original fails.
• Continuity tested pin to pin, with a flex test during the check.
• Connectors crimped and strain-relieved so the cable cannot pull out of the shell.
• Sheath resistant to oil, size mist and repeated handling.
• Coiled and bagged so the cable is not bent sharply in transit.
• Warranty covers manufacturing defects (case-by-case evaluation). Damage from pinching, cutting or incorrect routing during fitting is excluded.

Specifications

Order & Shipping Information

• Minimum order quantity: starting from 2 pieces.
• Sample order is acceptable for evaluation on the loom.
• Stock items ship within 5 working days after payment confirmation.
• Neutral export packaging by default; private-label and custom packaging service available.
• Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
• Complete export documents including commercial invoice and packing list will be supplied.
• We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions

Q1: Display goes blank when the panel is opened. Cable or display?
Almost always the cable. Flex the cable gently along its run while the loom is powered; if the display reacts, the conductor is broken inside the sheath and the cable needs replacing.

Q2: Only part of the display is missing. Can a cable cause that?
Yes. A broken conductor in a multi-core cable removes specific characters or segments, which is often mistaken for a failing display panel.

Q3: How do I avoid the same failure with the new cable?
Route it as the original was routed, with slack at the hinge rather than a tight bend, and keep it clear of the frame edge that rubs it. Most repeat failures are routing, not the cable.

Q4: Is this the only display cable on the machine?
No. More than one display cable is used; check which position has failed and confirm the part number on the old cable's label.

Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Damage from pinching, cutting or incorrect routing during fitting is not covered.