TOUCH CONTROL CARD YHE-0224-3 Toyota JAT-710 JAT-810 Loom Panel Input Controller Board

Product Overview

Touch control card for Toyota JAT-710 and JAT-810 air jet loom control panels. Item code YHE-0224-3.

This card reads the touch layer and turns a press into a command. It sits behind the display, so when it fails the screen still looks perfect and the loom still runs — only the input misbehaves. Typical reports: a press in one corner works while another area is dead, the cursor lands a centimetre away from the finger, a value can be changed but not confirmed, the panel needs a firm press with a fingernail where a fingertip used to be enough, or the panel registers a press nobody made. Where the display unit (YHE-0224) covers the whole assembly, this card is the input stage only and is replaced on its own when the image is fine.

Applications & Compatibility

Supplied to weaving mills and loom electrical teams maintaining JAT-710 and JAT-810 panels.

• Compatible with: Toyota JAT-710 air jet loom
• Compatible with: Toyota JAT-810 air jet loom
• Our item code: YHE-0224-3
• Complete display assembly: 64540-00001 (YHE-0224)
• No OEM number marked on these cards; identification is by connector and board shape

Before ordering, separate card faults from touch-layer faults. If the image is clean and only part of the screen responds, the touch layer or its ribbon is the suspect; if the whole panel ignores input while the image keeps updating, the card is the better candidate. Re-seat the ribbon connector first — a partially inserted ribbon produces exactly the same "dead corner" symptom. A gentle clean of the screen edge also removes the size dust that makes a panel feel unresponsive.

Quality Standard

• Touch response verified across the full screen area, corners included.
• Pointer position checked for offset against the displayed target.
• Ribbon connector and its latch checked for secure seating before packing.
• Continuous input run tested for missed or phantom presses.
• Conformal coating against lint and humid cabinet air.
• Anti-static bag with foam in a rigid carton, ribbon protected from creasing.
• Warranty covers manufacturing defects (case-by-case evaluation). Static damage, torn ribbons and liquid ingress are excluded.

Specifications

Order & Shipping Information

• Minimum order quantity: starting from 2 pieces.
• Sample order is acceptable for evaluation on the loom.
• Stock items ship within 5 working days after payment confirmation.
• Neutral export packaging by default; private-label and custom packaging service available.
• Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
• Complete export documents including commercial invoice and packing list will be supplied.
• We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions

Q1: One corner of the screen does not respond. Card or touch layer?
Re-seat the ribbon connector first; a partly inserted ribbon gives the same symptom. If it persists, the touch layer is more likely than the card, and the complete display unit is the part to order.

Q2: The press lands away from where I touch. Can that be fixed?
Run the panel calibration if your loom offers it, then test again. If the offset returns, the card is the item to replace.

Q3: Does this come with the display?
No. YHE-0224 is the complete display assembly; this listing is the touch control card alone, for panels whose image is still good.

Q4: No part number on the old card. How do you identify it?
Send a photo of the card face and the connector side. We match on connector type, board size and touch type, and confirm before dispatch.

Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Static damage, torn ribbons and liquid ingress are not covered.