DISPLAY CABLE HL1075-3 Toyota JAT-710 Air Jet Loom Panel Connection Harness Part

Product Overview

Panel display cable for the Toyota JAT-710 air jet loom. Item code HL1075-3.

More than one display cable runs inside the 710 panel, and the job that wastes the most money is replacing the wrong one. This listing covers the shorter in-panel run with its own connector type; the longer cable to the cabinet is a different item. Both fail the same way — a conductor breaks inside a sheath that still looks perfect — so the cable has to be identified by where it runs rather than by the symptom alone. The practical sequence: flex each cable in turn with the loom powered and watch the display. The one whose movement disturbs the image is the one to replace.

Applications & Compatibility

Supplied to weaving mills and loom electrical teams maintaining JAT-710 panels.

• Compatible with: Toyota JAT-710 air jet loom
• Our item code: HL1075-3
• Also in service: 64520-01000 display cable (YHE-0219) for the other position
• No OEM number marked; identification by length, conductor count and connectors

Before ordering, measure the old cable end to end and count the conductors, then photograph both connectors. Length and connector type are what separate the display cables on these looms, and a cable that is a few centimetres out will fit but will pull tight at the hinge and fail again within months. Where the old cable has been replaced before with a part that did not match, expect the routing to have been altered as well — restore the original path when fitting the new one.

Quality Standard

• Length and conductor count matched to the original in-panel run.
• Stranded conductors chosen for flex life at the panel hinge.
• Continuity tested pin to pin, with a flex test during the check.
• Connectors crimped and strain-relieved so the cable cannot pull out of the shell.
• Sheath resistant to oil, size mist and repeated handling.
• Coiled and bagged so the cable is not bent sharply in transit.
• Warranty covers manufacturing defects (case-by-case evaluation). Damage from pinching, cutting or incorrect routing during fitting is excluded.

Specifications

Order & Shipping Information

• Minimum order quantity: starting from 2 pieces.
• Sample order is acceptable for evaluation on the loom.
• Stock items ship within 5 working days after payment confirmation.
• Neutral export packaging by default; private-label and custom packaging service available.
• Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
• Complete export documents including commercial invoice and packing list will be supplied.
• We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions

Q1: How do I know which display cable has failed?
Flex each cable in turn with the loom powered. The cable whose movement changes the image is the failed one. If neither responds, the fault is upstream in the board.

Q2: Is this the same as the 64520-01000 cable?
No. They cover different runs inside the panel with different lengths and connectors. Send a photo if you are unsure which position has failed.

Q3: Can I fit a slightly longer cable?
It may fit, but extra length at the hinge tends to be dressed into a tight loop, which is exactly where the original broke. Match the length.

Q4: The display only fails when the loom is running. Does that fit a cable?
Yes. Vibration opens a broken conductor intermittently. A wiggle test with the machine running is the quickest confirmation.

Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Damage from pinching, cutting or incorrect routing during fitting is not covered.