PRINT BOARD GROB WARP STOP BOX TOYOTA JAT600 610 710 HL1100 Loom Part YHE-0250
Product Overview
This print board is a replacement part for the Grob warp stop box fitted to Toyota JAT600, JAT610 and JAT710 air jet looms, supplied as the circuit board inside the stop box (HL1100). Our item code YHE-0250.
The board reads the dropper contacts and turns a broken end into a stop signal for the loom. When it starts to fail, the symptoms are easy to misread: the loom stops with no broken end to be found, a genuine break runs through several picks before the stop reacts, or one section of the dropper bed goes quiet. Replacing the board brings the whole detection field back rather than chasing contacts one by one.
Applications & Compatibility
Used by weaving mills, loom repair workshops and electrical maintenance teams for warp stop system repair.
- Compatible with: Toyota JAT600 / JAT610 air jet looms
- Compatible with: Toyota JAT710 air jet looms
- Assembly: Grob warp stop box
- Our item code: YHE-0250 (HL1100)
- Function: warp break signal processing
Please confirm your loom model and the board revision marked on the existing unit before ordering, since stop box versions differ between loom generations.
Quality Standard
- Board layout and terminal positions matched to the original for direct replacement, no rewiring needed.
- Each board powered up and signal tested on a bench before packing.
- Conformal coating applied against lint, oil mist and humidity in the weaving room.
- Connectors and mounting holes checked for fit on every batch.
- Video outgoing inspection can be provided on request before shipment.
- Warranty covers manufacturing defects (case-by-case evaluation). Damage from wrong wiring, voltage faults or moisture ingress is excluded.

Specifications
| Product | PRINT BOARD, GROB WARP STOP BOX (HL1100) |
| Item Code | YHE-0250 |
| Model | JAT-600 / JAT-610 / JAT-710 |
| Assembly | Grob warp stop box |
| Function | Warp break signal processing inside the stop box |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Neutral export packaging with anti-static protection; private-label packaging available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I know the board rather than the droppers is at fault?
If the loom stops with no broken end present, or a whole section of the dropper bed stops responding while the droppers themselves look clean, the board is the usual suspect. We can talk you through the check.
Q2: Is this board correct for my loom?
Please send the board revision marked on your existing unit, or your loom model, and we will confirm before you order.
Q3: Do I need to change settings after fitting?
No setting change is normally needed, but the stop box connectors should be checked for firm seating after installation.
Q4: Can you supply other control boards in the same order?
Yes. Function panel and encoder parts from the same series can be quoted together with this board.
Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Damage from wrong wiring, voltage faults or moisture ingress is not covered.
Send your inquiry directly to us