WARP STOP DETECTOR CABLE GROB TOYOTA JAT600 610 710 HL1102 Loom Part YHE-0252
Product Overview
This cable is a replacement part for the Grob warp stop detector system on Toyota JAT600, JAT610 and JAT710 air jet looms, supplied under item code HL1102. Our reference YHE-0252.
The cable carries the detection signal from the stop box back to the loom control. A cable that has hardened, been pinched at the frame edge or corroded at the connector produces faults that come and go: the loom stops with no broken end, or a genuine break runs on for several picks before the control reacts. Because the fault is intermittent, the cable is often the last part to be suspected, yet it is one of the cheapest to renew.
Applications & Compatibility
Used by weaving mills, loom repair workshops and electrical maintenance teams for warp stop system repair.
- Compatible with: Toyota JAT600 / JAT610 air jet looms
- Compatible with: Toyota JAT710 air jet looms
- Our item code: YHE-0252 (HL1102)
- System: Grob warp stop detector
Please confirm your loom model and take a photo of the existing cable routing and connector, so we can match length and plug type before you order.
Quality Standard
- Length, connector type and pin layout matched to the original part for direct replacement.
- Continuous continuity checked on every cable before packing.
- Insulation rated for vibration and oil mist in the weaving room.
- Connectors strain-relieved so the cable cannot pull on the pins in service.
- Video outgoing inspection can be provided on request before shipment.
- Warranty covers manufacturing defects (case-by-case evaluation). Damage from cutting, pinching or wrong wiring is excluded.

Specifications
| Product | CABLE, WARP STOP DETECTOR, GROB (HL1102) |
| Item Code | YHE-0252 |
| Model | JAT-600 / JAT-610 / JAT-710 |
| System | Grob warp stop detector |
| Function | Signal cable between detector and loom control |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 5 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Neutral export packaging; private-label packaging available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I know the cable is at fault?
Intermittent stops with no broken end, or a stop that only triggers when the loom frame vibrates, point to the cable. Wiggling the cable gently while the loom runs is a quick check.
Q2: Is this cable correct for my loom?
Please send a photo of the existing cable and connector, or your loom model, and we will confirm length and plug type before you order.
Q3: Can I order the print board with the cable?
Yes. The HL1100 stop box print board and this cable are quoted together regularly, since a damaged cable often accompanies board faults.
Q4: Do you support neutral or private-label packing?
Neutral packaging is standard. Custom private-label packaging is available on request.
Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Damage from cutting, pinching or wrong wiring is not covered.
Send your inquiry directly to us