WARP STOP BOX PRINT BOARD TOYOTA JAT-600 610 710 HL1104 Loom Part YHE-0254 J9805-00011-00
Product Overview
This print board is a replacement part for the warp stop box on Toyota JAT-600, JAT-610 and JAT-710 air jet looms, supplied as the circuit board inside the box (HL1104). Original part number J9805-00011-00, our item code YHE-0254.
The board collects the dropper contact signals and turns a broken end into a stop command for the loom. When it starts to fail, the loom behaves in ways that look mechanical: it stops with no broken end to be found, a real break runs several picks before the stop reacts, or one block of droppers goes silent while the rest keep working. Replacing the board restores the full detection field in one fitting.
Applications & Compatibility
Used by weaving mills, loom repair workshops and electrical maintenance teams for warp stop system repair.
- Compatible with: Toyota JAT-600 / JAT-610 air jet looms
- Compatible with: Toyota JAT-710 air jet looms
- Original part number: J9805-00011-00
- Our item code: YHE-0254 (HL1104)
- Assembly: Toyota warp stop box
Please confirm your loom model and the board revision marked on the existing unit before ordering, since two different stop box boards are used across these loom generations.
Quality Standard
- Board layout and terminal positions matched to the original for direct replacement, no rewiring needed.
- Each board powered up and signal tested on a bench before packing.
- Conformal coating applied against lint, oil mist and humidity in the weaving room.
- Connectors and mounting holes checked for fit on every batch.
- Video outgoing inspection can be provided on request before shipment.
- Warranty covers manufacturing defects (case-by-case evaluation). Damage from wrong wiring, voltage faults or moisture ingress is excluded.

Specifications
| Product | PRINT BOARD, WARP STOP BOX (HL1104) |
| Original Part Number | J9805-00011-00 |
| Item Code | YHE-0254 |
| Model | JAT710 / JAT810 |
| Assembly | Toyota warp stop box |
| Function | Warp break signal processing inside the stop box |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Neutral export packaging with anti-static protection; private-label packaging available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How is HL1104 different from HL1100?
They are two different stop box boards used on these loom generations. HL1104 is quoted against Toyota reference J9805-00011-00, HL1100 is the Grob stop box board. Send us the number on your existing board and we will supply the matching version.
Q2: How do I know the board rather than the droppers is at fault?
If the loom stops with no broken end present, or one block of droppers stops responding while the droppers look clean, the board is the usual suspect.
Q3: Do I need to change settings after fitting?
No setting change is normally needed, but check that every connector is firmly seated after installation.
Q4: Can you supply the cable and nuts with the board?
Yes. The HL1102 detector cable and HL1101 clamping nuts are quoted together with this board regularly.
Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Damage from wrong wiring, voltage faults or moisture ingress is not covered.
Send your inquiry directly to us