WARP STOP BOX PRINT BOARD TOYOTA JAT-710 810 HL1104-1 Loom Spare Part Board
Product Overview
This print board is supplied for the warp stop box on Toyota JAT-710 and JAT-810 air jet looms, as the HL1104-1 version in the HL1104 board series. It sits inside the stop box and handles the dropper contact signals.
The board turns a broken end into a stop command for the loom. When it begins to fail, the loom stops with no broken end to be found, a genuine break runs several picks before the stop reacts, or one block of droppers goes quiet while the rest keep working. Renewing the board restores the whole detection field in one fitting instead of chasing single channels.
Applications & Compatibility
Used by weaving mills, loom repair workshops and electrical maintenance teams for warp stop system repair.
- Compatible with: Toyota JAT-710 air jet looms
- Compatible with: Toyota JAT-810 air jet looms
- Our item code: HL1104-1
- Series: HL1104 warp stop box print board
- Assembly: warp stop box
Please confirm the board revision printed on your existing unit and your loom model before ordering, since more than one board version is used across these loom generations.
Quality Standard
- Board layout and terminal positions matched to the original for direct replacement, no rewiring needed.
- Each board powered up and signal tested on a bench before packing.
- Conformal coating applied against lint, oil mist and humidity in the weaving room.
- Connectors and mounting holes checked for fit on every batch.
- Video outgoing inspection can be provided on request before shipment.
- Warranty covers manufacturing defects (case-by-case evaluation). Damage from wrong wiring, voltage faults or moisture ingress is excluded.

Specifications
| Product | PRINT BOARD, WARP STOP BOX (HL1104-1) |
| Item Code | HL1104-1 |
| Model | JAT-710 / JAT-810 |
| Assembly | Warp stop box |
| Function | Warp break signal processing inside the stop box |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Neutral export packaging with anti-static protection; private-label packaging available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How is HL1104-1 different from HL1104?
They are versions within the same stop box board series, used according to the loom generation. Send us the revision printed on your existing board and we will supply the matching version.
Q2: How do I know the board rather than the droppers is at fault?
If the loom stops with no broken end present, or one block of droppers stops responding while the droppers look clean, the board is the usual suspect.
Q3: Do I need to change settings after fitting?
No setting change is normally needed, but check that every connector is firmly seated after installation.
Q4: Can you supply the cable and nuts with the board?
Yes. The HL1102 detector cable and HL1101 clamping nuts are quoted together with this board regularly.
Q5: What about the warranty?
Warranty is offered against manufacturing defects, evaluated case by case. Damage from wrong wiring, voltage faults or moisture ingress is not covered.
Send your inquiry directly to us