PIN MALE TOYOTA JAT-610 Air Jet Loom Spare Part HL1131-02 Crimp Blade Terminal for JAT710 JAT810 Repair
Product Overview
Male crimp pin for Toyota JAT-610 / JAT-710 / JAT-810 air jet looms. Reference HL1131-02.
This pin is crimped onto the wire and inserted into the plug housing, where it forms the contact blade that slides into the female socket. Because it is the part that physically enters the socket, its geometry decides contact pressure: a pin that is slightly short, bent or under-plated will cause an intermittent joint long before any loom component fails.
Applications & Compatibility
- Used on: Toyota JAT-610 / JAT-710 / JAT-810 air jet looms
- Reference: HL1131-02
- Type: male crimp pin / blade contact
- Inserted into the plug housing until the lance engages
- Intended for harness repair and scheduled terminal renewal
Tell us the wire size and housing type you are working on, and we will confirm this pin is the right match before shipping.
Quality Standard
- Blade formed to the original profile so it enters the socket without scraping the plating off.
- Copper alloy base with plated contact zone for stable resistance in humid weaving rooms.
- Crimp barrel sized for a defined wire range; using the matched tool gives a reliable joint.
- Locking lance pressed to a precise angle so the pin clicks in and stays put.
- Batch samples crimped and pull-tested to confirm tensile strength before dispatch.
- Warranty against manufacturing defects, assessed case by case; poor crimping or damage from forced insertion is not covered.

Specifications
| Product | Pin, male (crimp terminal) |
| Reference | HL1131-02 |
| Model | JAT-610 / JAT-710 / JAT-810 |
| Type | Male blade contact |
| Termination | Crimp barrel |
| Fixing | Locking lance in housing cavity |
| Application | Loom harness repair |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 100 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Neutral export packaging by default; private-label and custom packaging service available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How does the male pin differ from the female one?
This is the blade contact that goes into the plug housing; the socket contact (HL1131-01) goes into the receptacle. Keep a stock of both if your team rebuilds harnesses.
Q2: What is the correct crimp height check?
Use a crimp height gauge or the maker mark on the tool. If the barrel is over-compressed the strands break, if under-compressed the joint loosens under vibration.
Q3: Can I insert the pin without the housing?
It is not recommended. The housing cavity keeps the pin square to the socket; a free pin will not hold alignment.
Q4: How many should a mill keep in store?
Terminals are consumables - a few hundred pieces cover years of routine harness repair on a mid-size installation.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Failures caused by wrong crimping tools or forced insertion are excluded.
Send your inquiry directly to us