LENO ENCODER TOYOTA JAT-710 Air Jet Loom Spare Part HL1135-2 Selvedge Position Feedback Encoder
Product Overview
Leno encoder for Toyota JAT-710 air jet looms. Reference HL1135-2.
The encoder reports the angular position of the leno device back to the loom controller. Because the controller uses that signal to time the crossing of the selvedge threads, small errors at the encoder become visible defects at the cloth edge: uneven loops, missed tucks and a selvedge that the cutter struggles to trim. Replacing the encoder restores the reference the controller needs, without touching the mechanical setting of the leno device.
Applications & Compatibility
Replacement part for the selvedge section of Toyota JAT-710 looms.
- Machine reference: Toyota JAT-710
- Reference: HL1135-2
- Function: leno device position feedback
- Mounting: original fixing points on the leno device
- Supplied with the original connector arrangement
Please confirm your loom series when enquiring. Encoder versions differ between series, and the type plate of the old unit is the safest reference.
Quality Standard
- Housing machined so the shaft centres correctly in the original bracket.
- Optical or magnetic sensing element checked for a clean, repeatable output across the full rotation.
- Output channels tested for dropouts and phase error on a bench rig before packing.
- Sealing checked so oil mist and fly cannot reach the sensing area.
- Packed in an anti-static bag with foam; condition and lead time confirmed on the quotation.
- Warranty on function at arrival, assessed case by case; damage from mechanical shock, incorrect wiring or moisture is not covered.

Specifications
| Product | Leno encoder |
| Reference | HL1135-2 |
| Model | JAT-710 |
| Function | Leno device position feedback |
| Mounting | Original fixing points on leno device |
| Output | Position pulses to loom controller |
| Testing | Bench verified for dropout and phase error |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Condition and lead time are confirmed on the quotation before you commit.
- Units in stock ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton; private-label packing available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: What are the first signs of a failing leno encoder?
Selvedge loops that vary from pick to pick, tucking faults that appear in runs, or a position alarm that clears when the loom is restarted. Mechanical wear in the leno discs gives similar symptoms, so check those first.
Q2: Does the encoder need calibration after fitting?
It must be set to the reference position described in the loom manual, usually with the leno device at a marked angle. Fitting it without setting the reference will keep the fault present.
Q3: Is the connector plug-and-play?
Yes, the connector follows the original arrangement. Check the cable screen and route the lead away from the main motor cables to avoid induced noise.
Q4: Can a damaged cable cause the same alarm?
Frequently. Inspect the lead for chafing near the moving parts before blaming the encoder; a broken screen or a bent pin mimics an encoder fault exactly.
Q5: How is the warranty handled?
Function is warranted at arrival and assessed case by case. Damage from mechanical shock, incorrect wiring or moisture is excluded.
Send your inquiry directly to us