SWITCH PHOTOELECTRIC TOYOTA JAT-610 Air Jet Loom Part HL1136 YHE-0286 67120-00005-0A Thread Sensor
Product Overview
Photoelectric switch for Toyota JAT-600 / JAT-610 / JAT-710 / JAT-810 air jet looms. Original part numbers 67120-00005-0A / 67120-00006-0A, our item code YHE-0286, reference HL1136.
The photoelectric switch detects the presence or absence of thread optically, and its signal is what the loom controller trusts when it decides whether a pick or a yarn end is present. Because there is no mechanical contact, the switch usually keeps working long after it has stopped being reliable: dust, fly and oil film on the lens slowly reduce the signal margin until the loom starts stopping for "no thread" on a perfectly good yarn, or worse, running on after a real break.
Applications & Compatibility
Used for thread sensing on Toyota air jet looms; the two original numbers cover the versions used across the listed series.
- Machine series: Toyota JAT-600 / JAT-610 / JAT-710 / JAT-810
- Original part numbers: 67120-00005-0A / 67120-00006-0A
- Our item code: YHE-0286
- Reference: HL1136
- Sensing: optical, non-contact
Two original numbers are listed because the loom version determines which one is fitted. Please confirm the number on your old unit and the mounting bracket before ordering.
Quality Standard
- Emitter and receiver matched as a pair so the switching point is consistent from unit to unit.
- Lens moulded with a smooth outer surface that wipes clean easily during routine cleaning.
- Housing sealed against fly and oil mist, which is the main cause of slow signal decay in weaving sheds.
- Each unit checked for switching distance and output response on a test fixture.
- Lead wire and connector supplied to the original configuration, with the screen intact.
- Warranty against manufacturing defects, assessed case by case; damage from impact, water ingress or incorrect wiring is not covered.

Specifications
| Product | Switch, photoelectric |
| Original Part Numbers | 67120-00005-0A / 67120-00006-0A |
| Item Code | YHE-0286 |
| Reference | HL1136 |
| Model | JAT710 / JAT810 |
| Machine | JAT-600 / JAT-610 / JAT-710 / JAT-810 |
| Sensing Method | Optical, non-contact |
| Output | Switching signal to loom controller |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag with foam protection in a neutral export carton; private-label packing available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The loom stops for no thread although the yarn is there. Is the switch at fault?
Usually yes, but clean the lens first. If the stop returns within a shift, the switch is losing signal margin and should be replaced.
Q2: How do I check the output without a scope?
Most controllers show the input state on a diagnostic screen. Pass and interrupt the thread by hand and watch the state change; a slow or sticky change points to a tired sensor.
Q3: Can I fit the switch without adjusting position?
Mark the bracket position before removal, then fit the new unit to the same mark. Small position errors change the switching point, especially on fine yarns.
Q4: Which of the two original numbers do I need?
It depends on the loom version and bracket. Send us the number stamped on the old unit and we will match it.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from impact, water ingress or incorrect wiring is excluded.
Send your inquiry directly to us