CABLE TOYOTA JAT710 JAT810 Air Jet Loom Spare Part HL1137 YHE-0287 Terminated Wiring Harness
Product Overview
Cable for Toyota JAT710 / JAT810 air jet looms. Reference HL1137, our item code YHE-0287.
This is a complete terminated cable, supplied with the plugs already fitted so it can be installed in one step instead of being rebuilt pin by pin in the workshop. Looms that have been in service for years often hide cable faults inside the loom frame: a conductor broken inside an intact jacket, a plug with a loose crimp, or a screen that has parted at a bend. Any of these will produce stops that no amount of setting adjustment can cure.
Applications & Compatibility
Intended for loom wiring repair and for keeping a replacement on hand during scheduled overhauls.
- Machine reference: Toyota JAT710 / JAT810 air jet looms
- Reference: HL1137
- Our item code: YHE-0287
- Supplied fully terminated, ready to fit
- Pin assignment checked against the loom wiring diagram
Length and connector type vary between positions on the loom. Send us the position you are repairing, or a photo of the old cable with its plugs, and we will confirm the match.
Quality Standard
- Conductors sized to the original current rating, with flexible stranding for loom vibration.
- Screen or twisted pairs applied where the original cable used them, so noise behaviour is unchanged.
- Plugs crimped with a matched tool, then strain-relieved so the load goes into the housing and not the terminals.
- Every cable is continuity tested pin by pin and insulation tested before packing.
- Jacket resistant to oil mist and abrasion; each cable labelled with its reference for store control.
- Warranty against manufacturing defects, assessed case by case; damage from pulling on the cable, cutting, or incorrect routing is not covered.

Specifications
| Product | Cable |
| Reference | HL1137 |
| Item Code | YHE-0287 |
| Model | JAT710 / JAT810 |
| Supply Form | Fully terminated, ready to fit |
| Testing | Pin-to-pin continuity and insulation |
| Jacket | Oil mist and abrasion resistant |
| Application | Loom wiring repair and overhaul spare |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Coiled at a safe bend radius in a neutral export carton; private-label packing available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I find an intermittent cable fault?
With the loom stopped, check continuity across each pin while flexing the cable along its route. A reading that changes as the cable moves confirms an internal break.
Q2: Can the old plugs be re-used?
The housings yes, if undamaged, but the terminals are single-use once removed. A complete cable is faster and removes the risk of a loose crimp.
Q3: Does cable length matter?
Always fit the original length. Extra length must be looped somewhere, and extra loops pick up noise and vibrate against the frame.
Q4: Should I replace cables preventively?
On looms past the ten-year mark, replacing the cables that flex most is cheaper than chasing unexplained stops. Keep one of each critical reference in the store.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from pulling the cable, cutting or incorrect routing is excluded.
Send your inquiry directly to us