BOARD TOYOTA JAT-710 Air Jet Loom Spare Part HL1140 YHE-0290 Control Board J9204-10000-00
Product Overview
Control board for Toyota JAT-710 / JAT-810 air jet looms. Original part number J9204-10000-00, our item code YHE-0290, reference HL1140.
Boards in a loom cabinet are the parts that turn an intermittent fault into a mystery. The symptoms are rarely clean: a function that works in the morning and not after the cabinet warms up, a stop pattern that moves when a connector is touched, or an alarm that disappears after a restart and returns two shifts later. Before ordering a replacement, confirm that the connectors are fully seated and the cabinet cooling is working - then swap the board as the fastest way to prove the diagnosis.
Applications & Compatibility
Supplied for loom control cabinet repair on the Toyota air jet loom series listed below.
- Machine reference: Toyota JAT-710 / JAT-810 air jet looms
- Original part number: J9204-10000-00
- Our item code: YHE-0290
- Reference: HL1140
- Mounted in the loom control cabinet
Board revisions exist within the same original number. Send us the code printed on the board and a photo of the cabinet position so we can match the version you need.
Quality Standard
- PCB layout and connector positions follow the original, so the board sits on the existing stand-offs.
- Components sourced from established makers; assembly on a controlled SMT line.
- Function test on each board, including input and output channels, before it is packed.
- Connector pins inspected for straightness and contamination.
- Sealed in an anti-static bag with foam, and labelled with the reference for store identification.
- Warranty against manufacturing defects, assessed case by case; damage from wrong supply voltage, short circuits caused by wiring faults, or static discharge during handling is not covered.

Specifications
| Product | Board |
| Original Part Number | J9204-10000-00 |
| Item Code | YHE-0290 |
| Reference | HL1140 |
| Model | JAT710 / JAT810 |
| Mounting | Loom control cabinet, original stand-offs |
| Testing | Input and output channels function tested |
| Handling | Anti-static bag, ESD precautions required |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and shock-absorbing foam in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: What should be checked before replacing a board?
Seat every connector firmly, check the cabinet fan and filter, and confirm the supply voltage. Many "board faults" are loose plugs or overheating that returns after the new board is fitted.
Q2: How do I confirm the board is the cause?
A swap test with a known-good board is fastest. If the fault moves with the board, the board is at fault; if it stays with the loom, look at the wiring and sensors.
Q3: Can a board be repaired?
Sometimes, usually a failed output driver or a swollen capacitor. For production looms an exchange unit is normally faster than bench repair.
Q4: What handling precautions are needed?
Disconnect the loom supply, wear an ESD strap, and hold the board by the edges. Record the connector positions with a photo before removal.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from wrong supply voltage, wiring short circuits or static discharge is excluded.
Send your inquiry directly to us