BOARD TOYOTA JAT-600 Air Jet Loom Spare Part HL1147 YHE-0297 JJ94600-QEAB1A-B Control Board
Product Overview
Control board for Toyota JAT-600 / JAT-610 air jet looms. Original part number JJ94600-QEAB1A-B, our item code YHE-0297, reference HL1147.
Most board replacements that go wrong do not fail because the board was bad - they fail because the removal was not documented. A connector pushed onto the wrong header, a DIP switch left in the position it came in, a fault code that was never cleared: all of these make a good board look faulty. This page sets out the sequence our engineers recommend, so the replacement either solves the problem or proves where it actually is.
Applications & Compatibility
Supplied for loom control cabinet repair on Toyota air jet looms.
- Machine reference: Toyota JAT-600 / JAT-610 / JAT-710 / JAT-810
- Original part number: JJ94600-QEAB1A-B
- Our item code: YHE-0297
- Reference: HL1147
- Mounted in the loom control cabinet
Confirm the original number and the cabinet position with a photograph before ordering; the same base number appears in more than one position on some loom versions.
Recommended Replacement Sequence
- Switch off and isolate the loom, then wait the discharge time stated in the manual.
- Photograph the board in place, covering every connector and its orientation.
- Record the fault codes and any stored settings before clearing anything.
- Note the DIP switch and jumper positions on the old board.
- Fit the new board and set the switches and jumpers to match.
- Reconnect, check each plug is fully seated, then power up and re-check the fault log.
If the same fault returns with a new board, the cause is in the wiring, sensors or supply - and the old board is probably still good.
Quality Standard
- Layout and connector positions to the original, so the plugs reach without strain.
- Function test of the board channels before packing, with the result recorded.
- Switch and jumper positions checked against the reference configuration.
- Contact surfaces cleaned; connector pins inspected for straightness.
- Anti-static bag with foam and a reference label for store identification.
- Warranty against manufacturing defects, assessed case by case; damage from wrong supply voltage, wiring short circuits, or static discharge during handling is not covered.

Specifications
| Product | Board |
| Original Part Number | JJ94600-QEAB1A-B |
| Item Code | YHE-0297 |
| Reference | HL1147 |
| Model | JAT710 / JAT810 |
| Mounting | Loom control cabinet |
| Configuration | DIP switch and jumper positions as reference |
| Testing | Channel function test before packing |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The fault is still there after fitting a new board. What now?
Return to the wiring: check the supply voltage, the sensor inputs and every plug. A fault that survives a board swap is almost always outside the board.
Q2: Do I need to clear the fault log?
Record it first, then clear it. Old codes confuse the diagnosis and can keep the loom from starting even when the fault is gone.
Q3: What if the DIP switches differ from the old board?
Set them to the positions recorded from the old board, not the factory default. Switch position often encodes the loom version or the machine option set.
Q4: Is it worth keeping a spare board in the mill store?
For a department of ten or more looms, one spare of the most frequently failed board usually pays for itself in a single avoided week of downtime.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from wrong supply voltage, wiring short circuits or static discharge is excluded.
Send your inquiry directly to us