BOARD LET-OFF TOYOTA JAT-610 Air Jet Loom Spare Part HL1151 YHE-0301 J9202-10000-00
Product Overview
Let-off board for Toyota JAT-610 / JAT-710 air jet looms. Original part number J9202-10000-00, our item code YHE-0301, reference HL1151.
Electronic let-off works on a simple principle: the board compares the warp tension it measures with the tension the style sheet asks for, then drives the let-off motor to close the gap. A replacement board therefore knows nothing about your machine until it is told - the beam diameter, the tension reference and the measurement scale all have to be entered or taught. Fitting the board without that step is the most common reason a new let-off board appears not to work.
Applications & Compatibility
- Machine reference: Toyota JAT-610 / JAT-710 / JAT-810
- Original part number: J9202-10000-00
- Our item code: YHE-0301
- Reference: HL1151
- Function: electronic let-off control, warp tension regulation
Let-off hardware differs across loom versions, and this board is quoted against the original number above. Confirm the marking on your old board before ordering.
After Fitting: What Must Be Set
- Warp beam diameter - full and empty values, otherwise tension drifts as the beam runs down.
- Tension reference - taken from the style sheet for the fabric being woven.
- Sensor or encoder scale - taught against the physical travel of the tension arm.
- Motor direction and gain - confirm the response is neither sluggish nor hunting.
Run a few metres on waste warp before the style goes back on the loom. Watching the tension arm behaviour during that test tells you more than any alarm list.
Quality Standard
- Board built to the original layout, with the same sensing input and motor output terminals.
- Analogue input conditioned and checked for drift before the assembly test.
- Motor output stage load tested, with current and temperature watched during a run-in period.
- Control response verified on a bench rig with a simulated tension arm signal.
- Anti-static packaging with reference label, plus a note of the firmware version where relevant.
- Warranty against manufacturing defects, assessed case by case; damage from wrong supply voltage, short circuits or static discharge during handling is not covered.

Specifications
| Product | Board, let-off |
| Original Part Number | J9202-10000-00 |
| Item Code | YHE-0301 |
| Reference | HL1151 |
| Model | JAT710 / JAT810 |
| Function | Electronic let-off, warp tension regulation |
| Inputs | Tension sensing, beam diameter reference |
| Output | Let-off motor drive |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The new board is fitted but tension is still wrong. What did I miss?
Almost always the beam diameter values or the tension reference. Without them the board has no baseline, so it cannot regulate anything.
Q2: How do I teach the sensor scale after replacement?
Move the tension arm through its full travel and confirm the reading follows without jumping. Most versions have a teach routine in the maintenance menu.
Q3: The let-off motor hunts back and forth. What causes that?
Gain too high, or a mechanical problem in the gearbox or brake. Lower the gain first, then check for backlash before blaming the board.
Q4: Can this board be used on later loom versions?
The original number is quoted for the series above. Later versions may use different let-off hardware, so confirm with us before ordering.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from wrong supply voltage, short circuits or static discharge is excluded.
Send your inquiry directly to us