CONNECTION ASSEMBLY CN2-1 O1 CN13 TOYOTA JAT-610 Loom Part HL1153-1 J9402-47000-0C Harness
Product Overview
Terminated connection assembly for Toyota JAT-600 / JAT-610 / JAT-710 air jet looms, designated CN2-1 / O1 CN13. Original part number J9402-47000-0C, reference HL1153-1.
This is the wiring item that joins the connectors marked on the loom harness drawing as CN2-1 / O1 CN13. Connector-designated parts like this are made to a specific pin map rather than a generic layout: every wire in the assembly is terminated in a defined cavity on each plug, so the two ends cannot be swapped without changing what the loom does.
Applications & Compatibility
- Machine reference: Toyota JAT-600 / JAT-610 / JAT-710
- Designation: CN2-1 / O1 CN13
- Original part number: J9402-47000-0C
- Reference: HL1153-1
- Supplied fully terminated with the designated plugs
The designation identifies the connection points on the harness drawing. If you are unsure of the position, send a photo of the old part and its connectors with your enquiry, and we will confirm the match.
Quality Standard
- Pin map followed from the original drawing, so cavity numbering matches both ends.
- Conductors sized for the original current load; lengths kept to the loom routing.
- Terminals crimped with a matched tool, then seated until the locking lance clicks.
- Each assembly continuity tested pin by pin, with insulation tested between adjacent circuits.
- Plugs labelled with their connector designation to make fitting on the loom straightforward.
- Warranty against manufacturing defects, assessed case by case; damage from pulling on the wires, incorrect routing or forced insertion is not covered.

Specifications
| Product | Connection assembly |
| Designation | CN2-1 / O1 CN13 |
| Original Part Number | J9402-47000-0C |
| Reference | HL1153-1 |
| Model | JAT-600 / JAT-610 / JAT-710 |
| Supply Form | Fully terminated, designated plugs |
| Testing | Pin-to-pin continuity and insulation |
| Labelling | Connector designation marked on plugs |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: starting from 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Coiled at a safe bend radius in a neutral export carton; private-label packing available.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I identify this part on my loom?
Look for the connector designations CN2-1 / O1 CN13 printed on the plugs or shown on the harness drawing. Matching the designation is more reliable than matching the wire colours.
Q2: Can the two ends be fitted the wrong way round?
The plugs are keyed, but check the designation labels before connecting. Swapping ends changes which circuit sees which signal.
Q3: Is the length fixed?
Yes, it follows the original loom routing. Extra length would have to be looped somewhere and would pick up noise.
Q4: My old part has no readable label. What then?
Send a photo of the part with both connectors visible and note the loom number. We will compare it against the drawing for your machine.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from pulling on the wires, incorrect routing or forced insertion is excluded.
Send your inquiry directly to us