BOARD TAKE UP LET-OFF TOYOTA JAT-610 Air Jet Loom Part HL1155 YHE-0305 Combined Control
Product Overview
Combined take-up and let-off board for Toyota JAT-600 / JAT-610 air jet looms. Our item code YHE-0305, reference HL1155.
On this generation the two motions that regulate cloth formation - take-up and let-off - are handled by a single board. That has one practical consequence worth knowing before you order: when the board fails, the symptom is rarely limited to one side. Pick density and warp tension start to interact, and the operator sees cloth that is alternately tight and loose rather than a clean single fault.
Applications & Compatibility
- Machine reference: JAT-600 / JAT-610
- Alternative model reference: JAT710 / JAT810
- Our item code: YHE-0305
- Reference: HL1155
- Function: take-up and let-off control on one board
The original part number is not fixed in this listing because the marking differs between builds. Send a photo of your old board with the enquiry and we will confirm the match before you commit to an order.
One Board, Two Motions: What to Expect
- Both sides affected - tension and density drift together; do not chase them as two separate faults.
- Single point of failure - a fault here stops the loom even though the mechanical parts are healthy.
- One spare for two motions - stock holding is simpler than carrying separate take-up and let-off boards.
- Both parameter sets to set - roll diameters for take-up, beam diameters and tension reference for let-off.
When a replacement is fitted, set both parameter groups before running the style. Setting one and forgetting the other is the usual reason a new board "half works".
Quality Standard
- Board built to the original layout, covering both motion outputs on the original terminal arrangement.
- Both output stages load tested individually, with current and temperature monitored.
- Shared sensing inputs checked for cross-talk between the two control loops.
- Parameters held in memory and verified for retention after power off.
- Anti-static packaging with reference label; the board is a single spare for two positions, so store it labelled.
- Warranty against manufacturing defects, assessed case by case; damage from a faulty motor, shorted cable, wrong supply voltage or static discharge during handling is not covered.

Specifications
| Product | Board, take-up and let-off (combined) |
| Original Part Number | Confirmed on your old board - quote by reference HL1155 |
| Item Code | YHE-0305 |
| Reference | HL1155 |
| Model | JAT710 / JAT810 |
| Machine | JAT-600 / JAT-610 |
| Function | Take-up density control and let-off tension control |
| Outputs | Take-up motor drive, let-off motor drive |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Marking confirmation from your old board is required before shipment.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Cloth is alternately tight and loose. Is this one fault or two?
On a combined board it is usually one. The take-up and let-off loops share the same electronics, so a failing channel drags the other with it.
Q2: How do I confirm the part number?
Send a photo of the old board showing the printed number and its connector layout. We check it against the reference before shipping.
Q3: Can I fit a separate take-up and let-off board instead?
Only where the loom wiring was built that way. The combined version uses a different harness and terminal arrangement.
Q4: What must be set after fitting?
Both parameter groups: roll diameters and pick density for take-up, beam diameters and tension reference for let-off.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a faulty motor, shorted cable, wrong supply voltage or static discharge is excluded.
Send your inquiry directly to us