BOARD MAIN LH2 TOYOTA JAT-710 Air Jet Loom Spare Part HL1159 YHE-0309 J9221-01021-00
Product Overview
Main board, designation LH2, for Toyota JAT-710 air jet looms. Original part number J9221-01021-00, our item code YHE-0309, reference HL1159.
The main board is the master of the loom: it holds the program, coordinates every other board and reports every alarm. Because it sits at the centre, a failing main board imitates almost anything - dead panel, missing functions, alarms that make no sense. The reverse is also true: a power supply that is sagging under load looks exactly like a failed main board, and that mistake is expensive.
Applications & Compatibility
- Machine reference: JAT-710
- Alternative model reference: JAT710 / JAT810
- Original part number: J9221-01021-00
- Board designation: LH2
- Our item code: YHE-0309
- Reference: HL1159
The LH2 designation identifies the board type and is part of the identification. Quote it together with the original number so the correct unit is supplied.
Before Condemning the Main Board
- Measure the DC rails under load - a supply that reads correctly with the loom idle and sags when the drives engage causes symptoms no board test will find.
- Watch the panel during power-up - a display that comes up late or flickers points to supply or connector, not to the program.
- Reseat the board in its slot - a poor backplane contact produces intermittent alarms that vanish when the cabinet warms up.
- Read the alarm history, not just the last alarm - a sequence of unrelated alarms is typical of a supply problem; one repeating alarm is typical of a channel.
- Check cabinet temperature - a main board that fails after two hours of running is usually being cooked, not worn out.
Only when the supply and the contacts are proven should the main board be replaced. Otherwise the new unit inherits the same conditions and the same failure.
Quality Standard
- Board built to the LH2 designation with the original connector and slot arrangement.
- Program loaded and full start-up sequence verified on the bench, including self-diagnostics.
- Supply tolerance tested at the low and high limits of the specified range.
- Communication channels to the I/O and drive boards checked for stable data transfer.
- Anti-static packaging with designation label; settings and version recorded for traceability.
- Warranty against manufacturing defects, assessed case by case; loss of stored data, damage from a failing power supply, wrong voltage or static discharge during handling is not covered.

Specifications
| Product | Board, main (LH2) |
| Designation | LH2 |
| Original Part Number | J9221-01021-00 |
| Item Code | YHE-0309 |
| Reference | HL1159 |
| Model | JAT710 / JAT810 |
| Machine | JAT-710 |
| Program | Loaded and start-up verified |
| Communications | I/O and drive boards checked |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The panel is dead. Is the main board gone?
Not necessarily. Check the DC supply rails and the panel connector first. A dead panel with a healthy supply is a different fault from a dead panel with no supply at all.
Q2: The loom runs for two hours then alarms. What does that suggest?
Heat. Verify the cabinet fan and filter, and measure the supply rails again when the loom is warm. The main board is often the victim here.
Q3: Will the new board arrive with the program loaded?
Yes. Start-up and self-diagnostics are verified before packing. Your style and calibration data must be restored from your own backup.
Q4: Can the LH2 board be exchanged with another designation?
No. Different designations carry different programs and connector arrangements, even where the outline looks the same.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a failing power supply, wrong voltage or static discharge is excluded.
Send your inquiry directly to us