BOARD MAIN I/O TOYOTA JAT-610 Air Jet Loom Part HL1161 YHE-0311 J9201-22010-00 C2
Product Overview
Main I/O board, designation C2, for Toyota JAT-610 / JAT-710 air jet looms. Original part number J9201-22010-00 C2, our item code YHE-0311, reference HL1161.
Fitting an I/O board is half the job. The board has no way of knowing which output drives which valve on your loom until the functions are proven one by one. A board that is electrically perfect can still leave a nozzle dead or a stop motion inactive if a plug is seated one cavity off or a channel is left unassigned. The acceptance list below is what our engineers run before a loom goes back into production.
Applications & Compatibility
- Machine reference: JAT-610 / JAT-710
- Alternative model reference: JAT710 / JAT810
- Original part number: J9201-22010-00 C2
- Board designation: C2
- Our item code: YHE-0311
- Reference: HL1161
The C2 designation is part of the identification. This board family has passed through several designations, and they are not interchangeable even where the outline matches.
Acceptance Test After Fitting
- Weft insertion - run the nozzle test sequence and confirm every nozzle fires in order, with no weak pick.
- Warp stop - break a yarn deliberately at both selvedges and in the middle; each must stop the loom.
- Weft feeler - confirm a missing pick is detected and the loom stops.
- Stop panel and lamps - every lamp and button must respond; a dark indicator is a symptom, not a decoration.
- Automatic functions - let-off, take-up and lubrication must move in the right direction on the first command.
- Record the result - note the loom number and date; the sheet becomes the baseline for the next repair.
Do the test with the loom empty or on waste warp. Discovering an unassigned channel while running a customer style is an expensive way to find out.
Quality Standard
- Board built to the C2 designation, with channel assignment kept identical to the original.
- Every input tested against a simulated sensor signal, including threshold behaviour.
- Every output load tested with current draw verified against the rated value.
- Plug and terminal seating inspected; isolation between field and logic side verified.
- Anti-static packaging with designation label; store away from oil mist and humidity.
- Warranty against manufacturing defects, assessed case by case; damage from shorted solenoids, moisture ingress, wrong supply voltage or static discharge during handling is not covered.

Specifications
| Product | Board, main I/O |
| Designation | C2 |
| Original Part Number | J9201-22010-00 C2 |
| Item Code | YHE-0311 |
| Reference | HL1161 |
| Model | JAT710 / JAT810 |
| Machine | JAT-610 / JAT-710 |
| Function | Sensor inputs with solenoid, valve and lamp outputs |
| Testing | Channel-by-channel input and output test |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The loom runs after fitting, but one nozzle does nothing. What is likely?
A plug seated one cavity off, a pin backed out, or that channel left unassigned. Run the acceptance list before suspecting the board.
Q2: How long should the acceptance test take?
About twenty minutes on an empty loom. It is the cheapest insurance against a quality claim on a full beam.
Q3: Do the lamps matter?
Yes. Indicator lamps are the operator interface; a dead lamp hides a fault that stops the loom later without explanation.
Q4: Can I reuse the old plugs on the new board?
Reuse the harness, not the crimped terminals. Terminals that have been seated for years lose tension and cause intermittent faults.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from shorted solenoids, moisture ingress, wrong supply voltage or static discharge is excluded.
Send your inquiry directly to us