POWER SUPPLY TOYOTA JAT-610 Air Jet Loom Spare Part HL1166 YHE-0316 J9201-12010-0B Unit
Product Overview
Power supply unit for Toyota JAT-600 / JAT-610 air jet looms. Original part number J9201-12010-0B, our item code YHE-0316, reference HL1166.
Every board in the cabinet depends on this unit, and it is the one component whose decline is invisible. A power supply does not usually die - it sags, drifts and increases its ripple as it ages, while still producing a reading that looks close to normal on a meter. Boards fed from a sagging supply behave oddly, and get replaced one after another while the real cause sits quietly in the corner of the cabinet.
Applications & Compatibility
- Machine reference: JAT-600 / JAT-610
- Original part number: J9201-12010-0B
- Our item code: YHE-0316
- Reference: HL1166
- Function: DC supply for the control and I/O boards
Fitment is confirmed against the original number. Where a cabinet has been modified, send a photo of the unit and its connections before ordering.
Symptoms of an Ageing Supply
- Correct voltage when idle, low when running - the classic sign; measure the rails with the loom working, not stopped.
- Alarms that make no sense together - unrelated faults appearing in the same period point at a shared supply.
- Panel flicker or delayed display - the display needs a stable rail during power-up.
- Boards failing repeatedly at different positions - if replacements do not solve the problem, the supply is the common factor.
- A warm or discoloured housing - age and heat go together; a supply that runs hot is close to the end of its life.
Measuring ripple needs a scope, but you can judge most cases with a meter: note the rail voltage idle, then under load, and compare with the value on the unit. A drop of more than a fraction of a volt under load is worth investigating.
Quality Standard
- Unit built to the original specification with matching output voltages and connector arrangement.
- Outputs load tested across the specified range, with voltage and ripple checked at each rail.
- Continuous run-in with the housing temperature monitored before packing.
- Protection behaviour verified, including response to an output short.
- Anti-static and foam packing with the reference marked; serial number recorded.
- Warranty against manufacturing defects, assessed case by case; damage from an output short in the field, wrong input voltage or static discharge during handling is not covered.

Specifications
| Product | Power supply unit |
| Original Part Number | J9201-12010-0B |
| Item Code | YHE-0316 |
| Reference | HL1166 |
| Model | JAT-600 / JAT-610 |
| Machine | JAT-600 / JAT-610 |
| Function | DC supply for control and I/O boards |
| Testing | Load test with voltage and ripple check |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The output measures correct on the bench. Why suspect the supply?
Because the fault appears under load. Measure the rails while the loom is running; a supply that reads well idle can still sag when the drives engage.
Q2: Several boards failed in one year. Could one cause explain that?
Yes. Repeated failures at different positions with no common function usually point to the supply, or to overheating in the cabinet.
Q3: Should the supply be renewed as a preventive item?
On high-hour machines it deserves consideration. It is cheaper than the boards it protects, and its decline gives no clear warning.
Q4: What else should be checked at the same time?
The cabinet fan and intake filter. A supply running in a hot cabinet ages far faster, and the filter is the cheapest fix in the cabinet.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a field short on the output, wrong input voltage or static discharge is excluded.
Send your inquiry directly to us