POWER SUPPLY TOYOTA JAT-710 Air Jet Loom Part HL1167 YHE-0317 J9201-12030-0G Unit
Product Overview
Power supply unit for Toyota JAT-710 air jet looms. Original part number J9201-12030-0G, our item code YHE-0317, reference HL1167.
A power supply is the one replacement in the cabinet that can take other parts with it if it is fitted carelessly. It feeds every board at once, on several rails, through connectors that look similar. Getting the swap right the first time is mostly a matter of sequence: isolate, discharge, mark, fit, verify the outputs before connecting the loads, and only then power the loom.
Applications & Compatibility
- Machine reference: JAT-710
- Original part number: J9201-12030-0G
- Our item code: YHE-0317
- Reference: HL1167
- Function: multi-rail DC supply for the control cabinet
Fitment is confirmed against the original number. Where a cabinet has been modified or a supply previously replaced, send a photo of the unit and its connectors before ordering.
Fitting It Without a Second Shutdown
- Isolate and wait - stored energy in a switching supply takes time to bleed down; do not open it or touch terminals immediately.
- Photograph every connector before removal - several rails use similar plugs, and one swapped plug can be expensive.
- Check the input voltage selection - where a selector exists, confirm it matches the plant supply before energising.
- Measure the outputs unloaded - every rail should read its nominal value before any board is connected.
- Connect loads with the supply off - never plug a board in with the rail live.
- Re-measure under load - a rail that collapses on connection means either a load fault or an undersized unit.
- Run a full function test - this is the step that catches a plug in the wrong position.
If the old supply failed with a shorted output, find the short before fitting the replacement. A board with a failed input capacitor will take the new supply down with it.
Quality Standard
- Unit built to the original specification with matching rails and connector arrangement.
- Every output load tested across its range, with voltage and ripple recorded at each rail.
- Continuous run-in with housing temperature monitored before packing.
- Protection behaviour verified, including response to an output short and to overload.
- Anti-static and foam packing with the reference marked; serial number recorded.
- Warranty against manufacturing defects, assessed case by case; damage from a field short on the output, wrong input voltage selection or static discharge during handling is not covered.

Specifications
| Product | Power supply unit |
| Original Part Number | J9201-12030-0G |
| Item Code | YHE-0317 |
| Reference | HL1167 |
| Model | JAT-710 |
| Machine | JAT-710 |
| Function | Multi-rail DC supply for the control cabinet |
| Testing | Rail-by-rail load test with ripple check |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Can I hot-plug the board connectors after fitting the supply?
No. Connect loads with the supply off, then energise. Plugging a board in with a live rail is how boards and supplies get destroyed together.
Q2: The outputs read correctly, but the loom still behaves badly. Why?
Check the rails under load and check that every connector is in its correct position. A rail that sags when the drives engage will not show on an idle meter.
Q3: The old supply failed with a shorted output. Can I just fit the new one?
Find the short first. A board with a failed input capacitor or a chafed harness will damage the replacement as soon as it is energised.
Q4: Should I keep a spare supply in stock?
For a department of any size it is worth considering. A supply failure stops the loom completely, and the part is cheaper than the boards it protects.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a field short, wrong input voltage selection or static discharge is excluded.
Send your inquiry directly to us