BOARD INVERTER TOYOTA JAT-710 810 Air Jet Loom Part HL1175 YHE-0321 J9205-11001-00
Product Overview
Inverter board for Toyota JAT-710 and JAT-810 air jet looms. Original part number J9205-11001-00, item code YHE-0321, reference HL1175.
An inverter board carries the highest currents in the cabinet, and it pays for that in heat. Heat does not break a board in one event; it dries the thermal interface, matts the fins with fibre, and lets the switching devices run a few degrees hotter every season until one of them fails. The board is then replaced - in the same cabinet, behind the same blocked filter - and it fails again.
Applications & Compatibility
- Machine reference: JAT-710 / JAT-810
- Original part number: J9205-11001-00
- Our item code: YHE-0321
- Reference: HL1175
- Position: cabinet, inverter slot
Fitment is confirmed by the original number and the slot. Confirm the revision marking on the old board as well, since cabinets in service often carry more than one revision.
Heat Is the Slowest Killer
- Look at the fins, not the board - fibre matted between heatsink fins is the most common cause of an inverter running hot.
- Check the thermal interface - paste and pads dry out with age; a board refitted onto a dried interface runs hotter than the one it replaced.
- Judge fan airflow, not fan noise - a worn fan spins and whines while moving far less air than it should.
- Renew the cabinet filter on schedule - it is the cheapest part in the cabinet and the one that protects the most expensive.
- Measure the heatsink temperature after a shift - the number tells you more about the cabinet than any alarm does.
- Do not fit a new board behind an old fault - blocked airflow will end the replacement the same way.
If the cabinet has been running with the door open for convenience, close it. A dirty cabinet and an open door are the same decision made twice.
Quality Standard
- Board built to the original specification with the correct revision marking and connector layout.
- Power devices and driver stage tested under load, with output wave shape and timing checked.
- Continuous run-in with the heatsink temperature monitored and recorded before packing.
- Protection behaviour verified against an output short and against a lost cooling path.
- Anti-static bag and foam packing with the reference and original number marked; serial recorded.
- Warranty against manufacturing defects, assessed case by case; damage from a field short, blocked cooling, wrong supply voltage or static discharge during handling is not covered.

Specifications
| Product | Inverter board |
| Original Part Number | J9205-11001-00 |
| Item Code | YHE-0321 |
| Reference | HL1175 |
| Model | JAT-710 / JAT-810 |
| Machine | JAT-710 / JAT-810 |
| Position | Cabinet, inverter slot |
| Cooling | Heatsink with forced air; keep fins clear |
| Testing | Load test with heatsink temperature recorded |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The replacement inverter failed within months. What did we miss?
Cooling. Matted fins, a weak fan or a blocked filter keep the new board just as hot as the old one. Fix the airflow before the next board goes in.
Q2: How often should the thermal interface be renewed?
Whenever a board is refitted, and whenever the old one shows discolouration around the devices. Reusing a dried pad is a false economy.
Q3: The fan runs, so why is the cabinet hot?
A worn fan moves far less air than a new one at the same speed. Check the filter and the fins as well; airflow is a path, not a part.
Q4: What temperature should the heatsink reach?
Compare with a healthy machine doing the same work. A clear difference between two identical looms is more useful than any single number.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a field short, blocked cooling, wrong supply voltage or static discharge is excluded.
Send your inquiry directly to us