BOARD MAIN NWP TOYOTA JAT-710 Air Jet Loom Part HL1176-1 Control Board Unit
Product Overview
Main board, designation NWP, for Toyota JAT-710 air jet looms. Item code HL1176-1, reference HL1176-1. The original number is not marked on this item.
Some boards in the cabinet are only identified by a three-letter designation. That is enough on the wiring diagram and not enough on a purchase order, which is why these are the boards that get ordered twice and fitted once. Identification is a sequence: designation, slot, connectors, photograph.
Applications & Compatibility
- Machine reference: JAT-710
- Designation: NWP
- Our reference: HL1176-1
- Item code: HL1176-1
- Position: cabinet, main board slot
The original number is not marked, so please send a photograph of the old board - whole board, designation marking and connector faces. We will match it against HL1176-1 and confirm before invoicing.
Reading a Three-Letter Designation
- Find the designation on the board itself - it is usually printed or on a label near the edge, not always where the connectors are.
- Match it to the cabinet drawing - the same letters appear at the slot, and the two together identify the board.
- Count the connectors and their ways - a designation can be shared by more than one build, connectors rarely are.
- Record the machine model with the designation - the same letters appear across models with different contents.
- Do not order by designation alone - it is the starting point, not the identifier.
Where the designation is not in your manual, it is usually because the machine was built for a different market or a later revision. The board will still be identifiable from the photographs.
Buying a Board With No Original Number
- Send photographs before ordering - front, rear and every connector face; this replaces the missing number.
- State the slot and the machine - the position is the second half of the identity.
- Mention what the board controls - it narrows the choice when two boards look alike.
- Ask for confirmation in writing - a match confirmed before invoicing is cheaper than a return from abroad.
- Keep the old board until the loom runs - it is the reference if anything needs checking later.
We would rather ask two questions before shipping than have a board cross the world and not fit. It is the same effort spent at the right end.
Quality Standard
- Board matched to reference HL1176-1 and to the supplied photographs before dispatch.
- Connector layout and designation marking checked against the original, not against a catalogue image.
- Functional test on the bench with all interfaces exercised, not only a power-up check.
- Continuous run-in with temperature monitored before packing.
- Anti-static bag and foam packing with the reference marked; serial recorded.
- Warranty against manufacturing defects, assessed case by case; damage from wrong supply voltage, a field short, reversed connectors or static discharge during handling is not covered.

Specifications
| Product | Main board |
| Designation | NWP |
| Reference | HL1176-1 |
| Item Code | HL1176-1 |
| Model | JAT-710 |
| Machine | JAT-710 |
| Position | Cabinet, main board slot |
| Identification | Designation, slot and photographs |
| Original Part Number | Quote by reference HL1176-1 |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: There is no part number on my board. How do I order?
Send photographs - whole board, the designation marking and every connector face - with the machine model and slot. That combination identifies it.
Q2: Is the designation NWP enough on its own?
No. The same letters appear on more than one build. The designation, the slot and the connector layout together are the real identifier.
Q3: The designation is not in my manual. Why?
Usually a different market build or a later revision. The board remains identifiable from photographs and the cabinet drawing.
Q4: Can you confirm the match before shipping?
Yes, and we will. A match confirmed in writing before invoicing is cheaper than a shipment that has to come back.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from wrong supply voltage, a field short, reversed connectors or static discharge is excluded.
Send your inquiry directly to us