BOARD CPU J2 TOYOTA JAT-710 810 Air Jet Loom Part HL1177 YHE-0323 J9201-20031-00
Product Overview
CPU J2 board for Toyota JAT-710 and JAT-810 air jet looms. Original part number J9201-20031-00, item code YHE-0323, reference HL1177.
The control of these looms is shared between two CPU boards, and that arrangement is helpful in one specific way: when something goes wrong, you can move a suspected board rather than buy one immediately. Most workshops replace first and reason afterwards, which is expensive when the part is a CPU.
Applications & Compatibility
- Machine reference: JAT-710 / JAT-810
- Original part number: J9201-20031-00
- Our item code: YHE-0323
- Reference: HL1177
- Position: cabinet, CPU J2 slot
Confirm the original number and the designation on the board. The two CPU boards in the same cabinet are different parts and will not substitute for each other.
Two CPUs, One Loom: Deciding Which One
- Record which board is which before anything is touched - the designations are the only reliable guide in a hurry.
- Use the machine as the test - where a second identical loom exists, move the suspect board and watch the fault travel with it.
- Change one board at a time - replacing both leaves nothing to compare against and hides the real cause.
- Treat a double failure as a common cause - two boards failing together usually means the supply, the earthing or the cabinet environment.
- Keep the parameter set from each board - they are separate, and only one of them may be easy to rebuild.
A fault that follows a board is a board fault. A fault that stays with the machine after a board swap was never in the board, and no amount of replacement will move it.
What to Note Before You Swap
- Take the parameter set from the board being removed - and check whether the pair share any settings.
- Photograph every connector - these boards carry many, and most fit more than one position.
- Write the software level down - a level mismatch changes behaviour on an otherwise correct board.
- Record the error history - it explains why the board is being changed once the memory is cleared.
- Label the boards on the shelf - two CPUs of similar appearance in one store is how the wrong one gets fitted.
Where the pair has run for years without a record, start the record with this replacement. It costs a label and saves the next diagnosis.
Quality Standard
- Board supplied to the original part number with the correct revision and software level.
- Functional test on the bench with all interfaces exercised, not only a power-up check.
- Continuous run-in with temperature monitored before packing.
- Memory and configuration behaviour verified so the board accepts a parameter set cleanly.
- Anti-static bag and foam packing with the reference, original number and version marked; serial recorded.
- Warranty against manufacturing defects, assessed case by case; damage from wrong supply voltage, a field short, reversed connectors, static discharge or loss of data during fitting is not covered.

Specifications
| Product | CPU board |
| Original Part Number | J9201-20031-00 |
| Item Code | YHE-0323 |
| Reference | HL1177 |
| Model | JAT-710 / JAT-810 |
| Machine | JAT-710 / JAT-810 |
| Position | Cabinet, CPU J2 slot |
| Pairing | Works with CPU J1, reference HL1176; the two are not interchangeable |
| Testing | Bench functional test with all interfaces exercised |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Can I fit this in the J1 position as a test?
No. The two CPU boards are different parts. Use a second identical loom to prove a board, not the other CPU slot.
Q2: How do I know which CPU is faulty?
Move the suspect board to an identical machine and see whether the fault travels with it. A fault that stays with the loom was never in the board.
Q3: Both CPU boards seem to have failed. Is that plausible?
Rarely as two independent events. Look for a common cause: supply rails, earthing, connectors or cabinet heat.
Q4: Should I replace both at once?
No. Changing one at a time keeps a known reference and preserves the ability to tell what actually fixed the loom.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from wrong supply voltage, a field short, reversed connectors or static discharge is excluded.
Send your inquiry directly to us