BOARD EI TOYOTA JAT-710 Air Jet Loom Original Part HL1180 YHE-0326 J9204-11001-00
Product Overview
EI board for Toyota JAT-710 air jet looms. Original part number J9204-11001-00, item code YHE-0326, reference HL1180. Original specification.
Boards in this position are widely copied, and the copies look convincing in a photograph. What differs is what cannot be seen at a glance: protective devices left out, a thinner coating, connectors from a different source. Those differences show up months later as a board that failed for no apparent reason - and the owner blames the loom.
Applications & Compatibility
- Machine reference: JAT-710
- Original part number: J9204-11001-00
- Our item code: YHE-0326
- Reference: HL1180
- Position: cabinet, EI board slot
Confirm the part number and the revision marking on the old board. Send a photograph of the removed board with the enquiry and we will confirm the match before dispatch.
How to Tell an Original Board From a Copy
- Compare the protective devices - copies often save cost exactly where protection is, and the board still runs.
- Look at the coating - an even conformal layer across the whole board, not just the populated centre.
- Check the connectors - original boards use keyed housings that seat firmly; copies often use unkeyed parts that fit loosely.
- Read the marking and revision - silk-screen print should be crisp and consistent, with the revision present.
- Inspect the solder at the power devices - an uneven joint here is the first thing to fail under thermal cycling.
- Ask for a photo of the actual unit - not a catalogue image. What ships should be what was photographed.
A copy that works is not the problem. A copy that works for eight months and then takes a motor drive with it is. The saving is real, and so is the bill that follows.
What the Number Tells You
- The prefix group identifies the board family - the same family appears in several positions with different tails.
- The middle digits belong to the function - a change here is a different board, not a revision.
- The final suffix is the revision - a later revision usually supersedes an earlier one, but confirm before assuming.
- Read it from the board, not from the manual - manuals lag behind the machines in service.
- Quote it in full - a truncated number is the most common reason a correct order arrives wrong.
Where your board carries a revision that is no longer listed, send the photograph. Supersession is normal and we will tell you what it can be replaced with.
Quality Standard
- Board supplied to the original part number with the correct revision and connector layout.
- Protection devices and coating verified against the original specification.
- Functional test on the bench with all interfaces exercised, not only a power-up check.
- Continuous run-in with temperature monitored before packing.
- Anti-static bag and foam packing with the reference and original number marked; serial recorded.
- Warranty against manufacturing defects, assessed case by case; damage from wrong supply voltage, a field short, reversed connectors or static discharge during handling is not covered.

Specifications
| Product | EI board |
| Original Part Number | J9204-11001-00 |
| Item Code | YHE-0326 |
| Reference | HL1180 |
| Model | JAT-710 |
| Machine | JAT-710 |
| Position | Cabinet, EI board slot |
| Specification | Original, with protection devices and full coating |
| Testing | Bench functional test with all interfaces exercised |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How can I tell whether a board is original before fitting it?
Compare protection devices, coating coverage, connector keying and the crispness of the marking. Ask for a photo of the actual unit rather than a catalogue image.
Q2: My board carries a different revision. Is it still available?
Send a photograph with the number. Supersession is normal, and we will confirm what the current replacement is.
Q3: Does a copy board damage the loom?
Not always, and not immediately. The risk is a missing protective device, which only matters on the day something else fails.
Q4: What causes a board to fail with no obvious reason?
A missing protection device, a poor solder joint at a power device, or coating that let moisture in. None of these announce themselves beforehand.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from wrong supply voltage, a field short, reversed connectors or static discharge is excluded.
Send your inquiry directly to us