BOARD INVERTER TOYOTA JAT-710 810 Air Jet Loom Part HL1183-1 J9205-00500-0A PCB
Product Overview
Inverter board for Toyota JAT-710 and JAT-810 air jet looms. Original part number J9205-00500-0A, item code HL1183-1, reference HL1183-1. The 0A suffix is part of the number and must match.
Inverter boards within one family share a footprint and a connector arrangement, so any of them will go in. What they do not share is the rating they were built to. An inverter is matched to the load it drives: fit the wrong one and the loom still runs, badly, and the damage appears in the load or in the board rather than in a fault code.
Applications & Compatibility
- Machine reference: JAT-710 / JAT-810
- Original part number: J9205-00500-0A
- Our item code: HL1183-1
- Reference: HL1183-1
- Position: cabinet, inverter slot
Quote the number in full, including the suffix. Where the cabinet has been worked on before, photograph the removed board and we will confirm the variant against your machine before dispatch.
Two Numbers, Two Duties
- The family is shared, the rating is not - a board from the same family in the same slot is not automatically the right board.
- Read the old number in full - the suffix is where variants differ, and it is the part most often left off an order.
- Check the motor nameplate against the board variant - the load is what decides which rating belongs there.
- Do not treat a higher rating as an upgrade - protection and parameter settings are matched to the original, and a stronger board can leave the load less protected.
- Record the variant in the cabinet - a label beside the slot prevents the next replacement from being a guess.
Two machines of the same model and different build years can carry different variants. The model number alone does not settle it.
Symptoms of a Mismatched Board
- Nuisance overcurrent trips - protection set for a different rating reacts to normal load.
- Different acceleration feel - the loom starts or reaches speed unlike its neighbours.
- The board runs hot while the load is normal - a rating that does not match the duty shows up as heat first.
- Faults that move - a mismatch produces symptoms that appear in different places on different days.
- Nothing at all, for a while - which is the worst case, because the loom runs until something else gives.
Where a replacement board has been in service and the loom has never felt right since, compare the number against the one removed before looking anywhere else.
Quality Standard
- Board supplied to the original part number, including the suffix, with the correct revision marking.
- Power devices and driver stage tested under load, with output wave shape and timing checked.
- Continuous run-in with heatsink temperature monitored and recorded before packing.
- Protection behaviour verified against an output short.
- Anti-static bag and foam packing with the reference and full original number marked; serial recorded.
- Warranty against manufacturing defects, assessed case by case; damage from a field short, insulation failure in the driven circuit, blocked cooling, wrong supply voltage or static discharge during handling is not covered.

Specifications
| Product | Inverter board |
| Original Part Number | J9205-00500-0A |
| Item Code | HL1183-1 |
| Reference | HL1183-1 |
| Model | JAT-710 / JAT-810 |
| Machine | JAT-710 / JAT-810 |
| Position | Cabinet, inverter slot |
| Variant Note | Same family as J9205-00710-0A, different rating; not interchangeable |
| Testing | Load test with output wave shape and timing checked |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How is this different from the other inverter board in the same family?
The rating it was built to. Same footprint, same connectors, different duty. Read the full number on the old board.
Q2: Can a higher-rated board be used as an upgrade?
No. Protection and parameter settings are matched to the original rating, and a stronger board can leave the driven load less protected.
Q3: My machine model matches but the number does not. Which is right?
The number on the board that came out. Machines of the same model and different build years can carry different variants.
Q4: What does a mismatched board feel like in service?
Nuisance trips, an unusual start, a board that runs hot on normal load, or nothing at all until something else fails.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a field short, insulation failure, blocked cooling, wrong supply voltage or static discharge is excluded.
Send your inquiry directly to us