logo

POWER SUPPLY TOYOTA JAT-710 810 Air Jet Loom Part HL1185 YHE-0328 LDC30F-2 Unit

Place of Origin: Shanghai, China
Brand Name: Y&H China
Certification: Good Quality
Model Number: JAT-710 / JAT-810
Product Details
Place of Origin:
Shanghai, China
Brand Name:
Y&H China
Certification:
Good Quality
Model Number:
JAT-710 / JAT-810
Minimum Order Quantity:
1 Piece
Price:
Request a Quote
Standard Packaging:
Anti-static bag and foam protection in neutral export carton
Delivery Time:
5 working days for stock items
Payment Terms:
L/C, D/A, D/P, T/T
Specifications
Item Code:
YHE-0328
Original Part Number:
LDC30F-2
Reference:
HL1185
Model:
JAT-710 / JAT-810
Machine:
JAT-710 / JAT-810
Product Type:
Power Supply Unit
Construction:
Open Frame, Cabinet Mounted
Function:
DC Supply For The Control Cabinet
Testing:
Load Test With Voltage And Ripple Recorded Per Rail
Use:
Toyota JAT-710 / JAT-810 Air Jet Looms
HS Code:
8504401990
Service:
24-Hour Online Service
Video Outgoing-Inspection:
Provided
Warranty:
Case-by-case
Key Markets:
Southeast Asia, Central Asia, South America, North America, Europe
Shipping:
Express (DHL/FedEx/UPS) / Sea Freight / Air Freight
Brand Name:
Y&H China
Product Description

Product Overview

Power supply unit for Toyota JAT-710 and JAT-810 air jet looms. Original part number LDC30F-2, item code YHE-0328, reference HL1185. Open-frame construction, mounted inside the cabinet.

This supply has no enclosure of its own. The cabinet is its enclosure, which means the dust, fibre and metal swarf that reach the cabinet reach the supply directly. It is also the reason a supply can look perfectly healthy on the bench and fail in service: nothing on an open frame protects it from its surroundings except the cabinet being closed and clean.

Applications & Compatibility

  • Machine reference: JAT-710 / JAT-810
  • Original part number: LDC30F-2
  • Our item code: YHE-0328
  • Reference: HL1185
  • Construction: open frame, cabinet mounted

Confirm the original number and the terminal arrangement before ordering. Because the unit is open frame, mounting pillars and clearances matter as much as the electrical rating.

No Case, So the Cabinet Is the Case

  • Fibre and swarf bridge clearances - an open frame has fine gaps between primary and secondary, and dust in them is a path, not a nuisance.
  • Keep the mounting pillars intact - never mount an open frame flat against metal or with a missing insulator.
  • Keep wiring off the board - a lead resting on a hot component ages both the lead and the supply.
  • Vacuum, do not blow - compressed air drives dust into exactly the gaps that must stay clear.
  • Close the cabinet - an open door turns an open-frame supply into an unfiltered one.
  • Check the AC side too - fuse, filter and terminal tightness decide how long the supply lives.

An open-frame supply is not a cheaper design; it is a design that assumes the cabinet does its job. When the cabinet stops doing it, the supply is the first component to notice.

Fitting One Safely

  • Isolate before touching anything - mains voltage is present on the board, not only at the terminals.
  • Allow the output capacitors to discharge - the board holds energy after the supply is switched off.
  • Confirm the input voltage selection - where a selector exists, check it against the plant supply before energising.
  • Measure the outputs before connecting loads - every rail at its nominal value, with no board attached.
  • Re-check under load - a rail that drops when the boards are connected means a load fault or an undersized unit.

If the failed unit shows a blackened area, do not simply replace it. Something on the load side or in the AC supply caused it, and the new unit will report the same fault in the same place.

Quality Standard

  • Unit built to the original specification with matching rails, terminal arrangement and mounting.
  • Insulation clearances and mounting pillars verified, since this unit has no enclosure of its own.
  • Every output load tested, with voltage and ripple recorded at each rail.
  • Continuous run-in with component temperature monitored before packing.
  • Anti-static and foam packing with the reference marked; serial number recorded.
  • Warranty against manufacturing defects, assessed case by case; damage from a field short, dust or metal ingress, wrong input voltage or static discharge during handling is not covered.

Air jet loom spare part quality inspection and stability test

Specifications

ProductPower supply unit
Original Part NumberLDC30F-2
Item CodeYHE-0328
ReferenceHL1185
ModelJAT-710 / JAT-810
MachineJAT-710 / JAT-810
ConstructionOpen frame, cabinet mounted
FunctionDC supply for the control cabinet
TestingLoad test with voltage and ripple recorded per rail
HS Code8504401990
Place of OriginShanghai, China

Order & Shipping Information

  • Minimum order quantity: 1 piece.
  • Sample order is acceptable for quality evaluation.
  • Stock items ship within 5 working days after payment confirmation.
  • Anti-static bag and foam protection in a neutral export carton.
  • Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
  • Complete export documents including commercial invoice and packing list will be supplied.
  • We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Air jet loom spare part export packing and shipping

Frequently Asked Questions

Q1: Why is this supply not enclosed?
By design - it mounts inside the cabinet and relies on the cabinet for protection. That makes a clean, closed cabinet part of the installation, not a detail.

Q2: Is dust really a problem on an open frame?
Yes. Fine clearances between primary and secondary are part of the safety design, and dust or metal particles bridging them is a fault path, not just dirt.

Q3: Can I mount it directly on the cabinet plate?
No. Use the original pillars and insulators. Mounting an open frame flat against metal removes a clearance that is there for a reason.

Q4: How should it be cleaned?
Vacuum it. Compressed air pushes dust into the gaps that must stay clear, and spreads it over the rest of the cabinet.

Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a field short, dust or metal ingress, wrong input voltage or static discharge is excluded.

Send your inquiry directly to us