MODULE SERVO BOARD TOYOTA JAT-610 Air Jet Loom Part HL1188 YHE-0347 MIG20J103H
Product Overview
Power module for the servo board on Toyota JAT-610 air jet looms. Original part number MIG20J103H, item code YHE-0347, reference HL1188.
This is the switching device at the heart of the servo drive, supplied as a module rather than as a complete board. Replacing it is a repair, not a plug-in: the module is pressed onto a heatsink through thermal compound and held by screws whose torque is part of the electrical path. Two of the three ways a new module fails within a week are mistakes made during fitting, not faults in the part.
Applications & Compatibility
- Machine reference: JAT-610
- Original part number: MIG20J103H
- Our item code: YHE-0347
- Reference: HL1188
- Position: mounted on the servo board, pressed to the heatsink
Match the marking on the module exactly. Modules that look identical differ in rating and in switching behaviour, and a substitute changes how the drive protects itself.
Reading a Failed Module
- A dead short across the output terminals - the classic signature, and usually the easiest to find.
- A short from gate to emitter - the drive stage is damaged too, so the module alone will not fix it.
- No visible damage at all - a module can fail open circuit and look untouched. Measure; do not judge by appearance.
- A cracked or lifted case - treat as the end of the story, and look for what caused it.
- Compare against a known good module - the readings that matter are the differences between terminals, not the absolute numbers.
Where the module is damaged, the gate drive in front of it nearly always is as well. Replacing the module and energising without checking that stage is how the new module is lost.
What Decides Whether the New Module Survives
- The old compound must be fully removed - a second layer on top of a dried one is an insulator, not a thermal path.
- Torque matters as much as compound - too little loses contact, too much cracks the case or warps the base.
- Check the mounting surface is flat and clean - a burr under the module is a hot spot waiting for a production week.
- Insulation to the heatsink must be verified - before any power is applied, not after.
- Gate and emitter leads must be correct - reversed connections destroy a healthy module in an instant.
- Run it in at partial load first - temperature tells you in minutes what a full shift would tell you in weeks.
The module is the most expensive single device on the board and the least forgiving of a rushed fitting. The time spent on compound, torque and the gate check is the cheapest part of the repair.
Quality Standard
- Module supplied to the original part number with matching marking and rating.
- Each unit checked for terminal-to-terminal and gate-to-emitter integrity before packing.
- Insulation and thermal performance verified on a sample basis from each batch.
- Original sealed packaging where available; anti-static protection in all cases.
- Packing marked with the reference and original number; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from incorrect torque, missing or contaminated thermal compound, reversed gate connections, a faulty gate drive or static discharge during handling is not covered.

Specifications
| Product | Power module for servo board |
| Original Part Number | MIG20J103H |
| Item Code | YHE-0347 |
| Reference | HL1188 |
| Model | JAT-610 |
| Machine | JAT-610 |
| Position | Mounted on the servo board, pressed to the heatsink |
| Fitting Note | Thermal compound and mounting torque are part of the electrical and thermal path |
| Testing | Terminal-to-terminal and gate-to-emitter integrity checked per unit |
| HS Code | 8541290000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and rigid foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Is this a complete servo board?
No. It is the power module used on the servo board, supplied as the module only. If the board itself is damaged beyond the module, a board replacement is the better route.
Q2: Can I fit it myself?
Only with the right tools and the discipline to follow compound, torque and insulation checks. Most early module failures come from the fitting, not from the part.
Q3: The module looked fine but the drive was dead. How?
Modules can fail open circuit with no visible damage. Measurement across the terminals is what tells you, not appearance.
Q4: Should the gate drive be checked at the same time?
Yes. A damaged module almost always means the stage driving it has been stressed, and a new module fitted to a faulty gate drive fails immediately.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect torque, contaminated compound, reversed gate connections, a faulty gate drive or static discharge is excluded.
Send your inquiry directly to us