CABLE 2M TOYOTA JAT-810 Air Jet Loom Part HL1190 Loom Wiring Harness Assembly
Product Overview
Cable assembly, 2 metres, for Toyota JAT-810 air jet looms. Item code HL1190, reference HL1190. Prepared with connectors fitted at both ends.
The 2 metres in the name is a specification, not a description. Length decides voltage drop on a supply pair and noise pickup on a signal pair, and both matter on a loom where the cabinet, the motor and the harness run close together. A cable that is one metre longer is not the same part.
Applications & Compatibility
- Machine reference: JAT-810
- Our item code: HL1190
- Reference: HL1190
- Length: 2 metres, connectors fitted at both ends
- Original part number: not marked on the cable; quote by reference HL1190
To confirm the correct cable, photograph both connector ends and note the machine number. Pin count, keying and shell type differ between positions that otherwise look identical, and a photograph settles it faster than any description.
Two Metres Is Not a Suggestion
- Length changes the electrical result - a longer run on a supply pair drops voltage; a longer run on a signal pair collects noise.
- The original length was chosen against the routing - extra cable has to go somewhere, and it usually ends up coiled beside a power lead.
- Do not splice to make up a shortfall - a joint in a moving harness fails at the joint, every time.
- Do not shorten one either - a re-terminated end is only as good as the tool and the operator, and usually worse than the factory end.
- Keep the same length in stores - a spare that "will do" becomes the cable fitted on the night shift.
A cable is the cheapest part in the cabinet and the one most often improvised. It is also the part that produces faults nobody can reproduce, because the fault moves with the harness.
Fitting and Routing
- Follow the original route - clamped where it was clamped, away from where it was kept away.
- Keep signal leads clear of power leads - parallel runs are what turn a good cable into an intermittent fault.
- Respect the bend radius - a tight bend at a connector puts the strain exactly where the conductors are weakest.
- Support the cable, do not hang it from the plug - the connector is not a strain relief.
- Check the latch, not just the push - a connector that seats without clicking will back out under vibration.
- Look at the old cable before discarding it - chafing and a polished spot show where the routing is wrong.
Where a cable has failed at a connector, the cause is often the way it was dressed rather than the cable itself. Fitting a new one along the same path produces the same result in the same number of months.
Quality Standard
- Assembly built to the 2 metre length with the correct connectors, pin count and keying.
- Continuity and pin-to-pin mapping checked on every assembly, not on samples.
- Insulation resistance tested between conductors and between conductors and shield.
- Connectors pull-tested after crimping; cable marking applied at both ends.
- Packing marked with the reference and length; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from incorrect routing, chafing against machine parts, oil or heat exposure, field splicing or damage during fitting is not covered.

Specifications
| Product | Cable assembly |
| Length | 2 metres |
| Item Code | HL1190 |
| Reference | HL1190 |
| Model | JAT-810 |
| Original Part Number | Not marked - quote by reference HL1190 |
| Connectors | Fitted at both ends; pin count and keying to match the machine position |
| Testing | Continuity, pin-to-pin mapping and insulation resistance on every assembly |
| HS Code | 8544422900 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 5 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Coiled, tied and bagged with connectors protected in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Can I use a 3 metre cable instead of 2 metres?
Not as an equivalent part. Length affects voltage drop and noise pickup, and the extra cable has to be routed somewhere. Order the length the machine was built with.
Q2: There is no part number on the old cable. How do I order?
Photograph both connector ends and send the machine number with the reference HL1190. Pin count and keying identify it reliably.
Q3: Can a damaged cable be spliced?
It can be made to work, and it will fail at the splice. In a moving harness a joint is a scheduled failure, not a repair.
Q4: The new cable failed in the same place as the old one. Why?
The routing is usually the cause. Look for a polished spot or chafing on the old cable and correct the path before fitting the replacement.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from routing, chafing, oil or heat, field splicing or damage during fitting is excluded.
Send your inquiry directly to us