logo

DISPLAY POWER SUPPLY TOYOTA JAT-710 Air Jet Loom Part HL1193 YHE-0364 LCA30S 5V 12V

Place of Origin: Shanghai, China
Brand Name: Y&H China
Certification: Good Quality
Model Number: JAT-710
Product Details
Place of Origin:
Shanghai, China
Brand Name:
Y&H China
Certification:
Good Quality
Model Number:
JAT-710
Minimum Order Quantity:
1 Piece
Price:
Request a Quote
Standard Packaging:
Anti-static bag and foam protection in neutral export carton
Delivery Time:
5 working days for stock items
Payment Terms:
L/C, D/A, D/P, T/T
Specifications
Item Code:
YHE-0364
Original Part Number:
J9206-51020-00
Reference:
HL1193
Model:
JAT-710
Product Type:
Display Power Supply, Dual Rail
Output:
5 V And 12 V
Function:
Supply For The Display Unit
Testing:
Both Rails Loaded Together, Voltage And Ripple Recorded
Use:
Toyota JAT-710 Air Jet Looms
HS Code:
8504401990
Service:
24-Hour Online Service
Video Outgoing-Inspection:
Provided
Warranty:
Case-by-case
Key Markets:
Southeast Asia, Central Asia, South America, North America, Europe
Shipping:
Express (DHL/FedEx/UPS) / Sea Freight / Air Freight
Brand Name:
Y&H China
Product Description

Product Overview

Power supply for the display unit on Toyota JAT-710 air jet looms. Original part number J9206-51020-00, item code YHE-0364, reference HL1193. Dual rail output, 5 V and 12 V.

This supply sits between the cabinet and the display, and it is the part nobody suspects. When a panel behaves oddly, the panel is replaced first; when the panel is fine, the supply is found second. It has two rails, and that is the useful part of the diagnosis: each rail fails in its own way, and the symptom tells you which one to measure.

Applications & Compatibility

  • Machine reference: JAT-710
  • Original part number: J9206-51020-00
  • Our item code: YHE-0364
  • Reference: HL1193
  • Output: 5 V and 12 V rails

Confirm the original number before ordering. The 5 V and 12 V rails are not interchangeable, and the connector arrangement differs from other supplies used in the same cabinet.

Two Rails, Two Symptoms

  • One rail feeds the logic, the other feeds the display - which means one rail failing does not switch everything off.
  • Blank or faded display with working keys - measure the display rail before blaming the panel.
  • Keys unresponsive under a lit display - the logic rail is the one to check, not the screen.
  • A rail that reads correct with no load and sags with the panel connected - the supply is failing, or the panel is drawing more than it should.
  • Both rails reading low together - the input side or the supply itself, not the display.

Measure at the supply first, then at the panel. The difference between the two readings is the cable and connectors, and it is a cheaper repair than either board.

When a Display Supply Fails Quietly

  • The symptom moves - one day a dim screen, the next an unresponsive keypad, because two rails are drifting independently.
  • The display is replaced for nothing - a panel swap that fixes nothing is usually a supply that was never measured.
  • Heat ages both rails together - a supply mounted where airflow is poor reaches its end sooner than its age suggests.
  • Loose output connectors look like a failing rail - check seating before condemning the unit.
  • Keep one spare for the display position - it is a small part that stops a machine for a whole shift.

A display fault costs production twice: once while the machine is stopped, and again when a panel is bought that was never the problem.

Quality Standard

  • Unit built to the original specification with both rails at their nominal values and output ripple checked.
  • Load tested on both rails together, not one at a time.
  • Continuous run-in with component temperature monitored before packing.
  • Connector type and pin arrangement verified against the original.
  • Anti-static bag and foam packing with the reference and original number marked; serial recorded.
  • Warranty against manufacturing defects, assessed case by case; damage from a field short, wrong input voltage, water ingress or static discharge during handling is not covered.

Air jet loom spare part quality inspection and stability test

Specifications

ProductDisplay power supply, dual rail
Original Part NumberJ9206-51020-00
Item CodeYHE-0364
ReferenceHL1193
ModelJAT-710
Output5 V and 12 V
FunctionSupply for the display unit
TestingBoth rails loaded together, voltage and ripple recorded
HS Code8504401990
Place of OriginShanghai, China

Order & Shipping Information

  • Minimum order quantity: 1 piece.
  • Sample order is acceptable for quality evaluation.
  • Stock items ship within 5 working days after payment confirmation.
  • Anti-static bag and foam protection in a neutral export carton.
  • Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
  • Complete export documents including commercial invoice and packing list will be supplied.
  • We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Air jet loom spare part export packing and shipping

Frequently Asked Questions

Q1: The screen is blank but the keys respond. What should I check?
The display rail. Measure at the supply, then at the panel. A rail that sags under load points at the supply.

Q2: Is this the same as the other supplies in the cabinet?
No. This one has two rails, 5 V and 12 V, and the connector arrangement differs. Order by the original number.

Q3: Why does the fault change from day to day?
Because two rails drift independently. One affects the display, the other the logic, so the symptom moves with whichever is worse that day.

Q4: A new panel did not fix it. Was the panel faulty?
Probably not. When a panel swap changes nothing, the supply was the fault and was never measured.

Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from a field short, wrong input voltage, water ingress or static discharge is excluded.

Send your inquiry directly to us