DISPLAY BOARD TOYOTA JAT-710 Air Jet Loom Part HL1193-2 Panel PCB Variant
Product Overview
Display board for Toyota JAT-710 air jet looms, variant 2. Item code HL1193-2, reference HL1193-2. Supplied without the display power supply (HL1193).
Two display boards exist for this position on the JAT-710. They belong to the same machine, sit in the same place and look close enough to be confused at a parts counter. They are not interchangeable, and the machine itself will not tell you which one it needs until you look at the board that came out.
Applications & Compatibility
- Machine reference: JAT-710
- Our item code: HL1193-2
- Reference: HL1193-2
- Related parts: HL1193 display power supply, HL1193-1 display board variant 1
- Original part number: not marked on this assembly; quote by reference HL1193-2
Send photographs of the old board: the full outline, both connector faces and the label. That is enough to separate the two variants and to avoid a return.
Two Boards, One Position
- Same position, different board - the variant is not something you can decide from the machine model alone.
- Compare the connectors first - count, keying and placement are where variants part company.
- Compare the key layout and outline - mounting holes and cut-outs differ just enough to matter.
- Do not order by the photograph on a website - a picture of the family is not a picture of your variant.
- Label the board that comes out - the next order should not start with a question.
Mixing the two variants usually produces a display that lights but does not behave, which then gets diagnosed as a software or communication fault for a week.
Why a Display Board Belongs on the Spare Rack
- It fails as a whole - unlike a worn bearing, a display board gives little warning before it stops the interface.
- Without it you cannot change settings - and on most looms that also means you cannot read the fault that stopped the machine.
- The cost is small against a stopped loom - it is one of the few spares where the ratio is this favourable.
- Keep the exact variant - a spare of the other variant is a spare in name only.
- Store it sealed and dry - a board kept in a weaving shed for two years is a board you cannot rely on.
Displays and power supplies are the two small parts that stop a machine from being set up, which is often more expensive than the stop itself.
Quality Standard
- Board supplied to the correct variant, with connector arrangement checked against the original.
- Every key and every displayed segment exercised on the bench, with results recorded.
- Display response checked across the full screen area, corners included.
- Continuous run-in with temperature monitored before packing.
- Anti-static bag and foam packing with the reference marked; serial recorded.
- Warranty against manufacturing defects, assessed case by case; damage from water or oil ingress, incorrect supply voltage, overtightened fixings or static discharge during handling is not covered.

Specifications
| Product | Display board, variant 2 |
| Item Code | HL1193-2 |
| Reference | HL1193-2 |
| Model | JAT-710 |
| Original Part Number | Not marked - quote by reference HL1193-2 |
| Related Parts | HL1193 power supply, HL1193-1 display board variant 1 |
| Variant Note | Not interchangeable with HL1193-1; confirm by connector and outline |
| Testing | All keys and segments exercised; display response checked across the full screen |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 1 piece.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Anti-static bag and foam protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I know whether my machine needs this or the other variant?
By the board that comes out. Send photographs of the outline, the connectors and the label, and we will match the variant before dispatch.
Q2: What happens if the wrong variant is fitted?
Typically the display lights but does not behave as expected, which then gets chased as a software or communication fault.
Q3: Is the power supply included?
No. This is the display board only. The display power supply is HL1193 and is ordered separately.
Q4: Is a display board worth keeping in stock?
For a mill with several JAT-710 looms, yes. Without a display you cannot change settings or read the fault that stopped the machine.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from water or oil ingress, incorrect supply voltage, overtightened fixings or static discharge is excluded.
Send your inquiry directly to us