DISPLAY CABLE TOYOTA JAT-710 Air Jet Loom Part HL1194 Panel Connecting Lead
Product Overview
Display connecting cable for Toyota JAT-710 air jet looms. Item code HL1194, reference HL1194. Connectors fitted at both ends.
This cable carries both the supply and the signals for the display, which makes it the one component whose failure can imitate every other display fault. It is also the cheapest part in the whole display chain, and the one most often skipped when a panel is replaced.
Applications & Compatibility
- Machine reference: JAT-710
- Our item code: HL1194
- Reference: HL1194
- Related parts: HL1193 display power supply, HL1193-1 and HL1193-2 display boards
- Original part number: not marked on this cable; quote by reference HL1194
Photograph both connector ends and note the machine number. The two ends are different from each other, and a photograph of the cabinet end alone will not identify the cable.
Before You Buy a Display, Check the Cable
- Flickering that follows vibration - a cable fault moves with the machine; a panel fault usually does not.
- Works with the door at one angle and not another - the most reliable sign of a damaged conductor.
- Keys intermittent, display fine - one conductor in the cable, not the panel.
- Display fine, backlight unstable - the supply pair in the same cable.
- Fault disappears when the connector is pressed - seating or a broken crimp, and it costs nothing to check.
- Look at the flex points first - the door hinge, the cabinet entry and any grommet carry all the fatigue.
Moving the harness gently while watching the display takes a minute. Replacing a panel, a board and a supply takes a month of ordering, and the fault can survive all three.
Two Ends, One Cable
- The ends are not the same - panel end and cabinet end use different connectors, so check both before ordering.
- Pull the plug, never the cable - a cable pulled by its conductors fails a few weeks later, inside the insulation.
- Keep the strain relief doing its job - clamped where it was clamped, or the next failure is at the connector.
- Route it where the door cannot pinch it - a display cable damaged by a hinge is a design accident repeated every shutdown.
- Check the latch engages - a connector that seats without a click backs out under vibration.
Display cables fail at the ends far more often than in the middle. That is useful: the fault is usually visible as a stretched crimp, a discoloured pin or a loose shell, if anyone thinks to look.
Quality Standard
- Assembly built with the correct connectors at both ends, matching pin count and keying.
- Continuity and pin-to-pin mapping checked on every assembly, not on samples.
- Insulation resistance tested between conductors and between conductors and shield.
- Connectors pull-tested after crimping; ends marked for identification.
- Packing marked with the reference; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from pulling on the cable, chafing at a hinge or grommet, oil or heat exposure, field splicing or damage during fitting is not covered.

Specifications
| Product | Display connecting cable |
| Item Code | HL1194 |
| Reference | HL1194 |
| Model | JAT-710 |
| Original Part Number | Not marked - quote by reference HL1194 |
| Related Parts | HL1193 power supply, HL1193-1 / HL1193-2 display boards |
| Connectors | Different at each end; fitted and tested |
| Testing | Continuity, pin-to-pin mapping and insulation resistance on every assembly |
| HS Code | 8544422900 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 5 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Coiled and bagged with connectors protected, in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The display flickers when the loom runs. Is it the cable?
Often. Flicker that follows vibration points at the cable. Move the harness gently while watching the screen, then check the ends.
Q2: The display works only when the door is at a certain angle. What does that mean?
A conductor is broken inside the insulation, almost always at a flex point. That is a cable, not a panel.
Q3: I replaced the panel and the fault stayed. Could it have been the cable?
Yes, and it is the most common outcome of skipping the cable. It is the cheapest part in the chain and the easiest to rule out.
Q4: How do I identify the correct cable if there is no part number?
Photograph both ends and send the machine number. The panel end and cabinet end are different connectors, so both photographs matter.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from pulling on the cable, chafing, oil or heat, field splicing or damage during fitting is excluded.
Send your inquiry directly to us