8PIN MALE CONTACTOR WHITE TOYOTA Air Jet Loom Part HL1203 Wiring Plug Housing
Product Overview
8-pin male connector, white housing, for Toyota air jet loom wiring. Item code HL1203, reference HL1203. Supplied with contacts, ready for crimping.
This is the mating half of the 8-pin pair: the side that carries the pins. Between the two halves, the male is the one that absorbs the damage, because the pins are what gets bent, pushed back and corroded.
Applications & Compatibility
- Application: loom wiring harness, 8-pin male connection
- Our item code: HL1203
- Reference: HL1203
- Mating part: HL1202, 8-pin female connector, white
- Original part number: not marked on the housing; quote by reference HL1203
Send a photograph of the housing and of the mating half with the machine number. Keying and latch shape vary between positions, and the female half of another position will not necessarily accept this one.
The Male Half Takes the Damage
- Pins bend when a connector is forced - the housing survives, the pin does not, and the fault appears weeks later.
- Pins get pushed back - a contact that is not locked in retreats under mating pressure and loses contact intermittently.
- The pin is the exposed metal - corrosion and arcing marks show here first, because this is the side that carries the current across a contact interface.
- A single bent pin condemns the housing - extracting and replacing one contact is possible, but only with the right tool and only once.
- Look at the pins before blaming the circuit - a spread or shortened pin explains faults that no meter reading will.
A male housing that has been mated carelessly is a slow fault generator: it passes a continuity test today, and fails a temperature cycle next month.
Numbering and Orientation
- Identify pin 1 before crimping - counting from the mating side reverses the order, and that is how two conductors get swapped.
- Write the pin number on each wire - a harness labelled at both ends can be checked; an unlabelled one can only be hoped for.
- Check continuity end to end before energising - a minute with a meter against a wrong connection that can cost a board.
- Keep the pair as a set in stores - male without female means a spliced harness on the night shift.
- Fit the protective cap until it is used - pins bent in a parts drawer are pins bent for no reason at all.
Most connector faults on a loom are not component failures. They are orientation, crimp or pairing mistakes that were never checked because the connector went together easily.
Quality Standard
- Housing to the correct 8-pin configuration, colour and keying, with matching contacts.
- Pin straightness and contact retention checked on every unit before packing.
- Sample contacts crimped and pull-tested from each batch.
- Housing material checked for brittleness and colour consistency against the reference.
- Bagged with pins protected and marked with the reference; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from incorrect crimping, bent pins from forcing a mating, soldering of crimp contacts, heat exposure or static discharge is not covered.

Specifications
| Product | 8-pin male connector housing |
| Poles | 8 |
| Housing Colour | White |
| Item Code | HL1203 |
| Reference | HL1203 |
| Mating Part | HL1202 female connector, white |
| Original Part Number | Not marked - quote by reference HL1203 |
| Testing | Pin straightness and contact retention checked; sample contacts pull-tested |
| HS Code | 8536699000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 10 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Bagged in a neutral export carton with pins protected.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Is this the male or the female half?
This is the male half, the side carrying the pins. The female half is HL1202, and both are separate orders.
Q2: One pin is bent. Can I straighten it?
You can, once, carefully. It will not be as good as it was, and the housing should be treated as due for replacement.
Q3: The connector goes together easily but a signal is missing. Why?
Usually pin numbering counted from the mating side, which reverses the order. Check continuity end to end before energising.
Q4: Should both halves be replaced together?
When either shows damage or heat marks, yes. A new male in a worn female makes poor contact and blames the harness.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect crimping, bent pins from forcing, soldering of crimp contacts or heat exposure is excluded.
Send your inquiry directly to us