PIN FEMALE CONTACTOR WHITE TOYOTA Air Jet Loom Part HL1203-002 68820-03002 Terminal
Product Overview
Female crimp terminal for the white connector series. Original part number 68820-03002, item code HL1203-002, reference HL1203-002. Supplied loose for crimping to the harness.
The female contact is a spring, and springs age. That single fact explains most of the intermittent faults in a loom harness: the connection is still there, still passes a continuity test, and no longer carries current the way it did when it was new.
Applications & Compatibility
- Type: female crimp terminal, white connector series
- Original part number: 68820-03002
- Our item code: HL1203-002
- Reference: HL1203-002
- Related parts: HL1203-001 male terminal, HL1202 female housing, HL1203 male housing
Match the terminal series and wire range to the housing before ordering. A contact that inserts without locking will read correctly today and fail under vibration later.
A Female Contact Is a Spring
- Grip relaxes with every mating cycle - and with every heat cycle, because the metal softens a little each time.
- Continuity passes long after the contact has failed - a resting ohm meter reading says nothing about behaviour under load.
- Measure voltage drop while current flows - a tenth of an ohm is nothing at rest and a warm terminal in service.
- Heat marks on the socket are the end of the story - discolouration means the joint has been running hot, and the spring has already lost tension.
- The female side usually wears first - it is the side that gets re-tensioned, re-mated and quietly abused during maintenance.
Squeezing a socket closed again is a known field fix and a short one: the metal has already been softened by heat, and it relaxes back faster the second time.
Mating Two Platings
- Tin against tin is normal in a loom cabinet - and it is where fretting corrosion appears on a vibrating machine.
- Mixing platings is a joint that corrodes quietly - the difference in potential does the work, moisture only speeds it up.
- Replace both halves of a worn pair - a new socket in a worn pin wears at the same rate as the old one did.
- Do not clean contacts with an abrasive - it removes the plating and leaves a surface that corrodes faster than before.
- A contact cleaner is a diagnostic, not a repair - if cleaning restores function, the contact is already suspect.
Loom cabinets are warm, slightly oily and constantly vibrating. That is precisely the environment where a thin plating and a relaxed spring stop being a detail.
Quality Standard
- Terminal supplied to the original part number with the correct wire range and plating.
- Contact spring force and lance dimensions checked against the reference on each batch.
- Sample crimps pulled to destruction to confirm die and terminal compatibility.
- Plating inspected for discolouration or contamination before packing.
- Bagged by quantity and marked with the reference; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from incorrect crimping, re-tensioning of the socket, abrasive cleaning, soldering or corrosion from moisture is not covered.

Specifications
| Product | Female crimp terminal |
| Original Part Number | 68820-03002 |
| Item Code | HL1203-002 |
| Reference | HL1203-002 |
| Series | White connector series |
| Supplied As | Loose terminals for crimping |
| Testing | Spring force and lance dimensions checked; sample crimps pulled to destruction |
| HS Code | 8536900090 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 100 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Bagged by quantity in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: The circuit tests fine but the fault comes back. Can a contact do that?
Yes. A relaxed socket reads correctly at rest and drops voltage under load. Measure the drop with current flowing, not resistance at rest.
Q2: Is squeezing the socket closed an acceptable repair?
It works briefly. The metal has usually lost tension permanently, and it relaxes again faster the second time.
Q3: Should I replace the pin as well?
When the pair has been running hot, yes. A new socket against a worn pin wears at the same rate as the one it replaced.
Q4: Why does the marking go dark on one contact only?
That joint has been running warmer than its neighbours, which points at contact resistance rather than at the load.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect crimping, re-tensioning, abrasive cleaning, soldering or corrosion is excluded.
Send your inquiry directly to us