12PIN FEMALE CONTACTOR WHITE TOYOTA Air Jet Loom Part HL1204 Wiring Connector
Product Overview
12-pin female connector, white housing, for Toyota air jet loom wiring. Item code HL1204, reference HL1204. Supplied with contacts, ready for crimping.
Twelve circuits in one shell is a convenience for the harness and a concentration of risk for the mill. Every wire in the connector shares one latch, one cavity block and one repair, and a single mistake takes eleven good circuits with it.
Applications & Compatibility
- Application: loom wiring harness, 12-pin female connection
- Our item code: HL1204
- Reference: HL1204
- Housing colour: white
- Original part number: not marked on the housing; quote by reference HL1204
Send photographs of the housing, the mating half and the wire side with the machine number. Pin count alone rarely identifies a connector, and this is where most wrong orders begin.
Twelve Pins, Twelve Chances to Bridge
- One stray strand can bridge two cavities - at eight pins it is a fault; at twelve, with tighter spacing, it is likely.
- Cramped crimping space - the last few contacts in a crowded shell get the least attention and the worst crimps.
- Photograph the connector before removing any wire - the pin map is knowledge you have exactly once.
- Label every wire at both ends - a twelve-way loom harness with unmarked ends is a puzzle, not a repair.
- Check continuity across all twelve afterwards - including the pairs you did not touch, because the damage usually happens there.
- One latch holds everything - a broken latch on a twelve-way plug takes twelve circuits out of service at once.
Rebuilding a connector is a small job done once. Rebuilding it without a pin map is a long job done twice, and the second time is after the loom has been stopped.
Pin Count Is Not Identification
- Twelve-pin shells differ in keying - two connectors with the same count may not mate at all.
- Latch shape and position vary - a housing that pushes on but does not lock is the wrong housing.
- Colour separates positions deliberately - white and black keep two identical-looking connectors apart during maintenance.
- Compare the mating half, not the drawing - the machine has the answer, and it is one photograph away.
- Keep the removed housing labelled in stores - it becomes the reference for the next order for free.
Ordering a connector by pin count is like ordering a bearing by its outer diameter. It is one of the dimensions, and the one that causes the least trouble.
Quality Standard
- Housing to the correct 12-pin configuration, colour and keying, with matching contacts.
- Latches, cavity walls and retaining clips checked on every unit before packing.
- Sample contacts crimped and pull-tested from each batch.
- Housing material checked for brittleness and colour consistency against the reference.
- Bagged with contacts protected and marked with the reference; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from incorrect crimping, bridged strands, forced mating of a mismatched pair or heat exposure is not covered.

Specifications
| Product | 12-pin female connector housing |
| Poles | 12 |
| Housing Colour | White |
| Item Code | HL1204 |
| Reference | HL1204 |
| Original Part Number | Not marked - quote by reference HL1204 |
| Supplied With | Contacts, ready for crimping |
| Testing | Latches and cavity walls checked; sample contacts pull-tested |
| HS Code | 8536699000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 10 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Bagged in a neutral export carton with contacts protected.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Is a 12-pin connector identified by its pin count?
No. Keying, latch shape and colour separate housings with the same count. Send photographs of both halves and we will confirm.
Q2: Why do faults appear in circuits I did not touch?
A stray strand or a disturbed contact next to the ones you worked on. Check continuity across all pins, not just the repaired ones.
Q3: The connector will not lock. Should I force it?
No. A housing that pushes on without locking is the wrong keying. Forcing it damages both halves and the latch on a 12-way takes all twelve circuits out.
Q4: Should I photograph the connector before re-pinning?
Always. The pin map exists only until the wires are removed, and it is the most common reason a connector job turns into a loom fault.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect crimping, bridged strands, forced mating or heat exposure is excluded.
Send your inquiry directly to us