COUPLER REGULATOR TOYOTA Air Jet Loom Part HL1212 Air Line Connector Replacement
Product Overview
Coupler with regulator for Toyota air jet loom air lines. Item code HL1212, reference HL1212. Quick-connect coupling body with an integrated pressure regulator, as a replacement for the unit on the machine.
Air-line fittings are the hardest spares to buy by description, because two units that look identical from a metre away can differ in thread, coupler profile and adjustment range. This is the fitting you match before you order, not after.
Applications & Compatibility
- Application: compressed air supply connection with pressure regulation, Toyota air jet loom
- Our item code: HL1212
- Reference: HL1212
- Original part number: not marked on the body; quote by reference HL1212
- Position: air line service point, coupler with regulator
Send the machine model and four photographs: the inlet thread, the coupler face, the adjustment knob with its range marking, and the mating plug that goes into it. Those four pictures settle the order.
Identify It With Four Photographs and Two Measurements
- Thread - measure the outside diameter and count the threads; PT, NPT and metric threads are visually similar and not interchangeable.
- Coupler profile - the shape of the plug and the latch arrangement. Two fittings that push together are not proof of the same standard.
- Port size - the body may accept a smaller or larger hose than the one on your machine; restricting flow is the fault people never find.
- Adjustment range - a regulator that starts at the wrong end of its range will either not reach the working pressure or be impossible to fine-set.
- Body style - panel mount, inline, bracket, or gauge port present or absent. Fitment is decided here as much as at the thread.
First word in identification is "measure", not "looks the same". A mill that keeps one photograph of each air fitting on file never orders the wrong one twice.
Fitting It Without Creating the Next Leak
- Hold the body, turn the hose - a regulator body twisted by its knob is a calibration waiting to drift.
- Sealant on the thread only - fragments inside the line travel to valves and jets, and they do not come back out.
- Tighten to seal, not to feel strong - taper threads crack housings before they stop leaking when over-torqued.
- Support the hose - a heavy line hanging from the coupler loads the thread every time the machine moves.
- Leak-check both ends - threads and coupler face, at working pressure, before the loom is started.
Then set the working pressure under flow, with the loom running. A regulator adjusted at rest is a setting that will not survive the first acceleration.
Quality Standard
- Coupler action, latch and regulator adjustment checked on every unit before packing.
- Thread form and coupler profile compared against the reference unit for correct fitment.
- Leak test at working pressure on each unit; adjustment range verified across the scale.
- Body material, finish and knob marking inspected for consistency with the reference.
- Packed individually with thread protection caps and labelled with the reference.
- Warranty against manufacturing defects, assessed case by case; damage from over-tightening, contaminated air supply, water ingress or physical impact is not covered.

Specifications
| Product | Coupler with regulator, air line |
| Item Code | HL1212 |
| Reference | HL1212 |
| Original Part Number | Not marked - quote by reference HL1212 |
| Function | Quick connection plus adjustable line pressure |
| Application | Toyota air jet loom compressed air supply |
| Testing | Leak test at working pressure; adjustment range verified |
| HS Code | 8481201090 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 5 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Individually packed with thread protection caps in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: There is no part number on the old unit. How do I order the right one?
Send four photographs - inlet thread, coupler face, knob with range marking, and the mating plug - plus the machine model. Thread and coupler profile are what decide the match.
Q2: Can I replace only the coupler and keep my old regulator?
Sometimes, if the bodies separate and the threads match. In most mill setups the two are one assembly and are replaced together.
Q3: The new unit fits but the pressure will not reach the working value. Why?
Either the adjustment range starts too high, or the port size is smaller than the original and is restricting flow. Both are checkable before installation.
Q4: How tight should the thread be?
Sealed and firm. Taper threads crack housings when over-tightened; a leak is better found with soapy water than with more force.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from over-tightening, contaminated air, water ingress or impact is excluded.
Send your inquiry directly to us