logo

AMPLIFIER LET OFF TOYOTA JAT-710 J9202-03000-0H Air Jet Loom Part HL1224-1 Warp Tension Drive

Place of Origin: Shanghai, China
Brand Name: Y&H China
Certification: Good Quality
Model Number: JAT-710
Product Details
Place of Origin:
Shanghai, China
Brand Name:
Y&H China
Certification:
Good Quality
Model Number:
JAT-710
Minimum Order Quantity:
1 Piece
Price:
Request a Quote
Standard Packaging:
Anti-static bag with foam protection in a neutral export carton
Delivery Time:
5 working days for stock items
Payment Terms:
L/C,D/A,D/P,T/T
Specifications
Item Code:
HL1224-1
Original Part Number:
J9202-03000-0H
Reference:
HL1224-1
Product Type:
Let-off Amplifier Board
Model:
JAT-710
Function:
Let-off Sensor Signal Processing And Motor Drive Output
Variant Note:
-1 Suffix; Confirm Against The Label On The Original Board
Testing:
Connectors And Board Surface Inspected; Power-on Function Test Where Test Facilities Apply
HS Code:
8448499000
Service:
24-Hour Online Service
Video Outgoing-Inspection:
Provided
Warranty:
Case-by-case
Key Markets:
Southeast Asia, Central Asia, South America, North America, Europe
Shipping:
Express (DHL/FedEx/UPS) / Sea Freight / Air Freight
Brand Name:
Y&H China
Product Description

Product Overview

Let-off amplifier for Toyota JAT-710 air jet looms. Item code HL1224-1, original part number J9202-03000-0H. The amplifier sits between the let-off sensor and the let-off motor, converting measured warp condition into motor drive.

Let-off is one of the few systems on a loom where the fault is written into the cloth rather than into a display. Warp slack, warp tight, or a density that drifts along the beam are all the amplifier reporting through the fabric.

Applications & Compatibility

  • Application: warp let-off control, Toyota JAT-710 air jet loom
  • Machine model: JAT-710
  • Our item code: HL1224-1
  • Original part number: J9202-03000-0H
  • Function: let-off sensor signal processing and motor drive output

Confirm the board by the original part number and by the machine model before ordering. Send a photograph of the fitted board showing its sockets and any suffix marking on the label.

Let-Off Is a Closed Loop, Not a Setting

  • Sensor, amplifier, motor - three parts, one loop. Any of them can produce the same cloth symptom.
  • Slack warp usually means the drive is not following - the command is there and the motor is not delivering it.
  • Over-tight warp usually means the feedback is missing - the loop opens and the amplifier drives defensively.
  • Density drift along a beam is the loop working badly, not failing outright: tension is corrected late, so the pick spacing wanders.
  • Before condemning the amplifier, check the sensor and the motor - a board is the most expensive of the three to replace on suspicion.

Read the cloth before reading the board. The direction of the error - slack or tight - is the loop telling you which end of it stopped working.

Commissioning a Replacement Amplifier

  • Record the old settings first - potentiometer positions, switch settings and any parameter values on the label, photographed before removal.
  • Power down properly - let-off drives hold stored settings, and a hot swap is how boards are lost.
  • Re-seat every connector - a partially seated plug on a new board produces a fault identical to the old one, which is how a good board gets blamed.
  • Run one beam and watch the trend - tension should stay inside the band from full beam to near-empty, not just at the start.
  • Keep a settings card in the cabinet - the next replacement takes twenty minutes instead of a shift.

A replacement amplifier is only half the job. The other half is proving the loop is closed, on a beam, with the loom running at production speed.

Quality Standard

  • Board identity verified against the original part number, machine model and suffix marking before packing.
  • Visual inspection of all connectors, terminals and board surface; no corrosion, no bridged or lifted pads.
  • Power-on function test with output stages checked before dispatch where test facilities apply.
  • Anti-static packing with foam protection for every unit.
  • Batch and part number recorded for traceability.
  • Warranty against manufacturing defects, assessed case by case; damage from incorrect supply voltage, shorted outputs, moisture, static discharge or physical impact is not covered.

Air jet loom spare part quality inspection and stability test

Specifications

ProductLet-off amplifier board
Item CodeHL1224-1
Original Part NumberJ9202-03000-0H
Machine ModelJAT-710
FunctionLet-off sensor signal processing and motor drive output
Suffix-1 - confirm against the label on the original board
TestingConnectors and board surface inspected; power-on function test where test facilities apply
HS Code8448499000
Place of OriginShanghai, China

Order & Shipping Information

  • Minimum order quantity: 1 piece.
  • Boards are tested and packed individually; please confirm part number and machine model when ordering.
  • Stock items ship within 5 working days after payment confirmation.
  • Anti-static bag with foam protection inside a neutral export carton.
  • Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
  • Complete export documents including commercial invoice and packing list will be supplied.
  • We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Air jet loom spare part export packing and shipping

Frequently Asked Questions

Q1: Should I change the amplifier or the let-off motor first?
Test both. If the motor does not follow a known command, the motor or its drive path is the suspect. If feedback is missing, the sensor or the amplifier input is. A board is the most expensive guess.

Q2: The new board gives the same symptom as the old one. Is it faulty?
Check connector seating and the sensor first. A partially seated plug reproduces the original fault exactly, and that is the most common reason a good board is rejected.

Q3: Do I need to re-enter settings after fitting?
Yes. Record potentiometer and switch positions from the old board before removal, then set the new one to match and verify over a full beam.

Q4: How do I confirm the suffix -1 is right for my machine?
Send a photograph of the label on the original board and the machine model. The suffix and the original part number together identify the variant.

Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect supply voltage, shorted outputs, moisture, static discharge or impact is excluded.

Send your inquiry directly to us