SHEET SWITCH TOYOTA Air Jet Loom Part HL1226 Membrane Keypad Panel Replacement
Product Overview
Sheet switch for Toyota air jet looms. Item code HL1226, reference HL1226. Flat membrane-type switch sheet with a flexible tail carrying the conductors to the connector.
A sheet switch has no moving parts to hear and no lever to watch. It fails quietly: a key that needs a harder press, a zone that stops responding, a press that registers twice. By the time the operator complains, the cause has usually been there for months.
Applications & Compatibility
- Application: loom control panel sheet (membrane) switch
- Our item code: HL1226
- Reference: HL1226
- Original part number: not marked on the sheet; quote by reference HL1226
- Type: flat switch sheet with flexible tail and connector
Send photographs of the whole sheet, the key layout, the tail exit point and the connector, plus the machine model. On a sheet switch the artwork is the part number.
It Fails at the Fold and the Edge
- The tail is the weak point - a flexible conductor flexed a few thousand times at one fold will crack before anything else on the sheet does.
- Edges lift first - an adhesive border that has started to lift lets oil mist and dust under the surface, and the fault moves as the layer creeps.
- Harder pressing is a symptom, not a habit - when an operator learns to press firmly on one key, that key is already failing.
- Heat and cleaning agents age the top layer - a sheet cleaned with solvent every week has a shorter life than the loom it is fitted to.
- Static kills quietly - handle the tail by the connector body, never by the exposed conductors.
None of these faults announce themselves. A sheet switch is replaced because someone finally wrote down that the same key has been pressed twice for a month.
What to Photograph Before Ordering
- The outline, flat on a table - with a ruler alongside for scale, so the sheet size is measurable.
- Key layout and legends - positions, symbols and any language variant. Artwork differs between markets and between machine series.
- The tail - which edge it leaves from, its length, and how many conductors run in it.
- The connector - housing type, pin count and pitch, photographed end-on with the latch visible.
- The mounting face - adhesive backing, frame, or screw holes; and the panel it sits on.
Five photographs and the machine model replace a part number that is no longer legible. Send them with the enquiry and the quotation comes back correct the first time.
Quality Standard
- Sheet dimensions, key positions and legends checked against the reference before packing.
- Every key zone continuity-tested individually; no dead or double-contact zones accepted.
- Tail conductors inspected for cracks at the fold and pull-tested at the connector.
- Adhesive backing and top layer inspected; sheets stored flat and dispatched flat.
- Packed flat between rigid boards in an anti-static bag, labelled with the reference.
- Warranty against manufacturing defects, assessed case by case; damage from solvent cleaning, abrasion, folding the tail sharply, static discharge or physical impact is not covered.

Specifications
| Product | Sheet (membrane) switch |
| Item Code | HL1226 |
| Reference | HL1226 |
| Original Part Number | Not marked - quote by reference HL1226 |
| Type | Flat switch sheet with flexible tail and connector |
| Testing | Every key zone continuity-tested; tail conductors inspected and pull-tested |
| Handling | Store and ship flat; handle by the connector body |
| HS Code | 8536500000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 5 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Packed flat between rigid boards in an anti-static bag, neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I order without a readable part number?
Send five photographs - outline with a ruler, key layout, tail, connector and mounting face - plus the machine model. The artwork identifies the sheet.
Q2: One key needs a hard press. Is the sheet finished?
Effectively yes. A key zone that needs extra force is a failing contact layer; cleaning the surface does not restore it.
Q3: Can the sheets be trimmed to fit?
No. Trimming cuts conductors and opens the layers to oil mist. Fit the sheet made for the panel.
Q4: How should spares be stored?
Flat, in the bag, away from heat and out of direct sunlight. A sheet bent over a shelf edge for a year is a sheet with a cracked tail.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from solvent cleaning, abrasion, sharp folding, static discharge or impact is excluded.
Send your inquiry directly to us