logo

PIN FEMALE TOYOTA JAT-610 JAT-710 JAT-810 Air Jet Loom Part HL1234 Crimp Contact Terminal

Place of Origin: Shanghai, China
Brand Name: Y&H China
Certification: Good Quality
Model Number: JAT-610 / JAT-710 / JAT-810
Product Details
Place of Origin:
Shanghai, China
Brand Name:
Y&H China
Certification:
Good Quality
Model Number:
JAT-610 / JAT-710 / JAT-810
Minimum Order Quantity:
100 Pieces
Price:
Request a Quote
Standard Packaging:
Bagged in quantity with protective packing in a neutral export carton
Delivery Time:
5 working days for stock items
Payment Terms:
L/C,D/A,D/P,T/T
Specifications
Item Code:
HL1234
Original Part Number:
Not Marked - Quote By Reference HL1234
Reference:
HL1234
Product Type:
Female Crimp Pin
Model:
JAT-610 / JAT-710 / JAT-810
Use:
Loom Wiring Harness Contacts
Testing:
Dimensions, Lance Form, Barrel Size And Beam Symmetry Checked; Insertion And Withdrawal Force Sample-tested
Fitting Note:
Select By Housing Series And Wire Range; One Re-seat Per Contact
HS Code:
8536900090
Service:
24-Hour Online Service
Video Outgoing-Inspection:
Provided
Warranty:
Case-by-case
Key Markets:
Southeast Asia, Central Asia, South America, North America, Europe
Shipping:
Express (DHL/FedEx/UPS) / Sea Freight / Air Freight
Brand Name:
Y&H China
Product Description

Product Overview

Female crimp pin for Toyota air jet loom wiring harnesses. Item code HL1234, reference HL1234. Fits connector housings used on JAT-610, JAT-710 and JAT-810 looms.

The female contact is the half that grips. It is a formed spring, it is the part that decides whether a circuit stays connected, and it is small enough that most of what matters cannot be seen without a light and a steady hand.

Applications & Compatibility

  • Application: loom wiring harness contacts
  • Machine models: JAT-610, JAT-710, JAT-810
  • Our item code: HL1234
  • Reference: HL1234
  • Original part number: not marked on the contact; quote by reference HL1234

Send a photograph of the housing cavity and the wire gauge in use. The contact is selected by the housing series and the wire range, and confirmed by the fit.

Test It Before You Trust It

  • Insertion feel - a healthy pair has a firm, even push and a small click. A pair that slides together easily will slide apart easily too.
  • Withdrawal feel - pull gently on the wire, not the contact. A contact that eases out of the cavity has a lance that is not engaging.
  • Compare resistance, do not chase absolutes - a mill multimeter is not a laboratory bridge, but a joint reading several times higher than its neighbour is a joint to replace.
  • Measure under load where possible - an idle circuit can read perfectly and still heat under current.
  • Look at the beam symmetry - with a light and a loupe, a spread or lopsided spring is visible before it becomes a fault.

The order of testing matters: feel, then pull, then measure. A contact that fails the first two does not need the third.

Extraction, and the One Rule About Reuse

  • Release the lance, do not force the wire - pulling a contact out by its cable deforms the cavity and the lance together.
  • One re-seat is the limit - a contact released twice has a lance that has been bent twice. Replace it.
  • Extract, then inspect the barrel - if the crimp has been disturbed by the extraction tool, the joint is now suspect even if the wire still holds.
  • Cut and re-crimp when in doubt - a new contact costs less than the call-out that follows a joint that was "probably fine".
  • Keep the housing - the cavity is usually the more expensive half, and it survives extraction if the tool is right.

Reuse is not forbidden, it is just misunderstood. One re-seat is normal maintenance. The third one is a habit that shows up later as an intermittent fault nobody can find.

Quality Standard

  • Contact dimensions, lance form and barrel size checked against the reference on a sample basis from each batch.
  • Spring beam symmetry inspected under magnification; spread or deformed contacts rejected.
  • Plating appearance inspected; no bare spots, flaking, no oxidation.
  • Insertion and withdrawal force verified on samples from each batch, mated against the corresponding male pin.
  • Crimp and pull test performed with production tooling on samples; packed and labelled with the reference, batch recorded.
  • Warranty against manufacturing defects, assessed case by case; damage from incorrect crimp tooling, probing with oversized pins, repeated extraction or moisture corrosion is not covered.

Air jet loom spare part quality inspection and stability test

Specifications

ProductFemale crimp pin
Item CodeHL1234
ReferenceHL1234
Machine ModelsJAT-610 / JAT-710 / JAT-810
Original Part NumberNot marked - quote by reference HL1234
UseLoom wiring harness contacts
TestingDimensions, lance form, barrel size and beam symmetry checked; insertion and withdrawal force sample-tested
HS Code8536900090
Place of OriginShanghai, China

Order & Shipping Information

  • Minimum order quantity: 100 pieces.
  • Sample order is acceptable for quality evaluation.
  • Stock items ship within 5 working days after payment confirmation.
  • Bagged in quantity with protective packing, neutral export carton.
  • Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
  • Complete export documents including commercial invoice and packing list will be supplied.
  • We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Air jet loom spare part export packing and shipping

Frequently Asked Questions

Q1: Will these fit my existing housings?
Send a photograph of the cavity and the wire gauge. The contact is chosen by housing series and wire range, and confirmed by the insertion feel.

Q2: Can I reuse a contact I have just extracted?
Once. A second extraction leaves a lance that has been bent twice, and that is where intermittent faults begin.

Q3: The joint measures fine on a meter. Why does it heat?
Resistance under load is what heats a joint. An idle measurement can look perfect while the contact is no longer gripping properly.

Q4: What is the quickest check in the workshop?
Gently pull the wire in the cavity, then compare resistance against a neighbouring circuit. Two minutes, no instruments beyond a meter.

Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect tooling, probing with oversized pins, repeated extraction or corrosion is excluded.

Send your inquiry directly to us