12PIN FEMALE CONTACTOR BLACK TOYOTA JAT-610 JAT-710 JAT-810 Air Jet Loom Part HL1238 Socket
Product Overview
12-pin female connector, black housing, for Toyota JAT-610, JAT-710 and JAT-810 air jet looms. Item code HL1238, reference HL1238. Supplied with contacts, ready for crimping.
Twelve cavities in one shell, in a position where oil mist, dust and vibration are everyday conditions. On a loom, most connector failures are not electrical events at all: they are contamination events that finally show up as electrical symptoms.
Applications & Compatibility
- Application: loom wiring harness, 12-pin female connection
- Machine models: JAT-610, JAT-710, JAT-810
- Our item code: HL1238
- Reference: HL1238
- Housing colour: black
- Original part number: not marked on the housing; quote by reference HL1238
Send photographs of the housing, the mating half and the wire side with the machine model. Cavity numbering and keying confirm the position.
Where the Oil Gets In
- It travels along the wire - oil mist wicks inside the insulation and arrives at the back of the cavity, not at the front where you look.
- A drip loop is a real repair - routing the harness with a low point below the plug makes oil run off instead of into the housing.
- The back of the cavity is the evidence - pull a wire back slightly and look at the seal area, not just the contact.
- Oil plus dust equals paste - the mixture holds contamination against the contact and slowly raises resistance.
- Face down where possible - a plug mounted with its cavity face downward sheds what lands on it.
The contact is rarely the first thing to fail. The path that leads to it is, and that path is decided by routing and by how the harness hangs.
Twelve Ways, Not Always Twelve Wires
- Spare cavities are for options - a harness built for several machine variants often uses fewer wires than the housing has cavities.
- Do not populate a cavity to "make it symmetrical" - an unused cavity is not a fault, and adding a wire changes the circuit logic.
- Empty cavities are a moisture path - where the design allows, keep unused positions sealed or fitted with a blanking plug.
- Record which cavities are used - a photograph of the wire side before disassembly is worth more than memory at the end of a shift.
- Never assume the count - twelve cavities does not mean twelve circuits, and it does not identify the connector on its own.
Counting pins is how two different plugs get confused. Counting used cavities, noting the keying and the colour is how they stop being confused.
Quality Standard
- Correct 12-pin female configuration, cavity numbering, black colour and keying checked against the reference before packing.
- Contact beam form and cavity walls checked on every unit; no spread or deformed contacts accepted.
- Insertion and retention force verified on a sample basis from each batch, mated against the corresponding male plug.
- Housing material, colour and latch action inspected for consistency with the reference.
- Bagged and labelled with the reference; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from oil contamination, probing with oversized pins, pulling on the cable or forced mating is not covered.

Specifications
| Product | 12-pin female connector housing |
| Poles | 12 |
| Housing Colour | Black |
| Item Code | HL1238 |
| Reference | HL1238 |
| Machine Models | JAT-610 / JAT-710 / JAT-810 |
| Original Part Number | Not marked - quote by reference HL1238 |
| Supplied With | Contacts, ready for crimping |
| Testing | Contact beam form, cavity walls and locking features checked; insertion and retention force sample-tested |
| HS Code | 8536699000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 10 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Bagged in a neutral export carton with contacts protected.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Are all twelve cavities used on my machine?
Often not. Harnesses are built for several machine variants, so some cavities stay empty. Record which are used before disassembly rather than assuming twelve circuits.
Q2: Oil is collecting inside the plug. Is the housing faulty?
Usually not. Oil mist travels along the wires. Check routing for a drip loop, and inspect the back of the cavities rather than the contact face.
Q3: Can I fit a blanking plug in unused cavities?
Where the housing design allows it, yes. An open cavity is a path for moisture and dust into the connector.
Q4: Do I need the male half too?
Only if it is worn. They are two separate items and replacing both together turns two call-outs into one.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from oil contamination, probing, pulling on the cable or forced mating is excluded.
Send your inquiry directly to us