SENSOR PRESSURE PA-20-103G-014 TOYOTA JAT-810 67310-01000-0C Air Jet Loom Part HL1239 Air Pressure Monitoring
Product Overview
Pressure sensor for Toyota JAT-810 air jet looms. Item code HL1239, original part number 67310-01000-0C, sensor marking PA-20-103G-014. Monitors air pressure at its tapping point and reports it to the loom control.
Pressure is the weft on an air jet loom. A sensor that reads slightly wrong, or a port that has slowly closed up, does not stop the machine - it makes the machine behave as though the air supply were marginal, and the weft stops get blamed on everything else.
Applications & Compatibility
- Application: air pressure monitoring, Toyota JAT-810 air jet loom
- Machine model: JAT-810
- Our item code: HL1239
- Original part number: 67310-01000-0C
- Sensor marking: PA-20-103G-014
Confirm by the original part number and the marking on the sensor body, and send a photograph of the installed position with its air connection. Fittings and threads differ between positions.
A Pressure Sensor Is Only as Good as Its Port
- The sensor measures at its port - if the tapping point is partly blocked by oil and dust, the reading is honest and wrong at the same time.
- Compare with a gauge teed in beside it - the quickest way to separate a sensor fault from a supply fault.
- A closed port reads steady - a value that never moves while the loom accelerates is a value that is not seeing the line.
- Air treatment protects the sensor - water carryover reaching the port is the most common cause of a slow, drifting reading.
- Check the tube, not only the sensor - a softened or kinked tube gives the same symptom as a failing sensor for a fraction of the price.
Before replacing anything, tee a gauge into the same point. Two readings settle in a minute what an hour of guessing does not.
Alarm, or Real Pressure Loss?
- Real loss follows the load - pressure falls when the loom speeds up and recovers when it slows.
- Sensor drift does not follow anything - the reading wanders with temperature and time, not with demand.
- Intermittent alarms at speed often mean a marginal supply - the sensor is the messenger, not the fault.
- Zero drift is a sensor symptom - a reading that no longer returns to its resting value after the line is shut off.
- Do not adjust the sensor to hide a supply problem - correcting the offset to stop alarms moves the fault into the cloth.
The distinction is worth an hour of careful work: mills replace pressure sensors for faults that live in the ring main, and replace compressors for faults that live in a two-hundred-gram sensor.
Quality Standard
- Sensor identity verified against the original part number and body marking before packing.
- Body, thread, electrical connector and seal inspected on every unit; no damaged threads, no cracked housing.
- Function checked at the marked range against a reference where test facilities apply.
- Electrical output checked for stable signal; connector pins inspected for corrosion.
- Packed individually with thread and port protection, labelled with the original part number; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from water or oil contamination, over-pressure, incorrect wiring or physical impact is not covered.

Specifications
| Product | Pressure sensor |
| Item Code | HL1239 |
| Original Part Number | 67310-01000-0C |
| Sensor Marking | PA-20-103G-014 |
| Machine Model | JAT-810 |
| Function | Air pressure monitoring at the tapping point |
| Testing | Identity verified; body and threads inspected; function checked against reference where facilities apply |
| HS Code | 9031809090 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Individually packed with port and thread protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I know whether the sensor or the air supply is at fault?
Tee a gauge into the same tapping point and compare. If the gauge agrees with the sensor, the supply is the problem. If they disagree, the sensor or its port is.
Q2: The reading never moves. Is that normal?
No. A pressure value that stays identical while the loom accelerates is usually a blocked port rather than a healthy line.
Q3: Can I adjust the sensor to stop nuisance alarms?
You can, and it usually moves a supply problem into the cloth. Find the cause first, then verify the sensor against a gauge.
Q4: What damages these sensors most?
Water and oil carryover reaching the port, over-pressure from a badly set regulator, and incorrect wiring. Air treatment upstream protects the sensor.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from contamination, over-pressure, incorrect wiring or impact is excluded.
Send your inquiry directly to us