SOLENOID TOYOTA JAT-810 J3220-01160-00 Air Jet Loom Part HL1240 Coil Actuator Replacement
Product Overview
Solenoid for Toyota JAT-810 air jet looms. Item code HL1240, original part number J3220-01160-00. Electromagnetic coil actuator, supplied as a replacement unit.
A solenoid is a coil, a plunger and a duty cycle. It has no brushes to wear and no gears to strip, which is why it is often condemned too early and diagnosed too late: when it stops working, the coil is usually the last thing that failed and the first thing replaced.
Applications & Compatibility
- Application: electromagnetic actuator, Toyota JAT-810 air jet loom
- Machine model: JAT-810
- Our item code: HL1240
- Original part number: J3220-01160-00
- Type: solenoid coil actuator with plunger
Confirm by the original part number and the marking on the body, and send a photograph of the installed position with its connector and linkage visible.
A Solenoid Fails in Three Places, Not One
- The coil - insulation breaks down under sustained heat. A shorted turn pulls more current and gets hotter, which is a loop that ends in an open circuit.
- The plunger - it must move freely. Sticking or a bent plunger looks exactly like a dead coil at the terminals.
- The circuit feeding it - a corroded pin or a voltage drop on the supply produces the same symptom, and is the cheapest of the three to fix.
- Resistance is read cold - a coil measured hot will always read high. Compare against a known-good coil of the same part.
- Heat is the history - a coil that is discoloured or smells of varnish has a story, and it usually involves a stuck plunger or a supply that never fully switched.
Three suspects, one symptom. Testing in order - supply, movement, coil - saves the coil for the cases where it is actually guilty.
Duty Cycle and How Long a Coil Lives
- Continuous energisation is not the same as cycling - a coil held in for hours runs hotter than one that pulses, and heat is what ends it.
- Under-voltage runs hotter, not cooler - a coil that never quite pulls in sits at high current without closing the magnetic circuit.
- Suppression matters - a missing or failed diode sends the collapse spike back through the winding and the driver.
- Mounting surface is part of the cooling - a coil fitted without its bracket contact sheds less heat than the design intended.
- A spare on the shelf is normal - solenoids are cheap, stoppages are not; most mills keep the one they use most.
Most failed coils are not defective. They spent their life energised at the wrong voltage, holding a plunger that could not quite move, or without the suppression the circuit was designed around.
Quality Standard
- Identity verified against the original part number and body marking before packing.
- Coil resistance checked cold on every unit and compared against the reference value.
- Insulation to frame checked; plunger movement and return verified by hand.
- Connector, terminals and body inspected for corrosion or damage.
- Packed individually with terminal protection and labelled with the original part number; batch recorded.
- Warranty against manufacturing defects, assessed case by case; damage from incorrect supply voltage, missing suppression, sustained over-temperature or physical impact is not covered.

Specifications
| Product | Solenoid coil actuator |
| Item Code | HL1240 |
| Original Part Number | J3220-01160-00 |
| Machine Model | JAT-810 |
| Type | Electromagnetic coil actuator with plunger |
| Testing | Coil resistance checked cold; insulation to frame checked; plunger movement verified |
| HS Code | 8505909000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Individually packed with terminal protection in a neutral export carton.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Does no click mean a dead coil?
Not necessarily. Check the supply at the connector first, then whether the plunger moves freely. A stuck plunger and a voltage drop both look like a dead coil.
Q2: How do I test the coil properly?
Measure resistance cold and compare with a known-good coil of the same part. A coil measured hot will always read high and tell you nothing useful.
Q3: Why do coils run hot?
Continuous energisation, under-voltage that prevents full pull-in, a missing suppression diode, or mounting that does not conduct heat away. Heat is what ends a coil.
Q4: Should I replace the suppression diode with the coil?
If the diode has failed, yes. A failed diode sends the collapse spike back through the winding and into the driver.
Q5: How is the warranty handled?
Manufacturing defects are covered case by case. Damage from incorrect supply voltage, missing suppression, sustained over-temperature or impact is excluded.
Send your inquiry directly to us