WEFT SENSOR 67699-00004-0B TOYOTA Air Jet Loom Weft Detection Feeler Part HL1242 Replacement Component
Product Overview
Weft sensor for Toyota air jet looms, supplied to original part number 67699-00004-0B under our item code HL1242. The sensor sits at the weft arrival side of the loom and confirms that the pick has arrived before the machine is allowed to continue.
Weft stop is the fault every weaver knows and the one most often blamed on the sensor. In practice the sensor is doing its job: it reports what reaches it. Lint on the sensing face, a loose or kinked fibre run, a dirty lens, a plug pushed half home - each of those produces exactly the same symptom as a dead sensor, and each costs nothing to check. Replacing the sensor first is the most expensive way to work through that list.
Applications & Compatibility
- Application: weft arrival detection on Toyota air jet looms
- Original part number: 67699-00004-0B
- Our item code: HL1242
- Product type: weft sensor / weft feeler
- Machine model: confirmed per enquiry against the original part number and your loom model
- Related item: the item code HL1241 sensor covers other detection positions on the same loom family
Toyota used more than one weft detection arrangement across the JAT generation, and the same function can be carried by sensors with a different body, connector or fibre connection. Send the original part number 67699-00004-0B together with your loom model and a photograph of the installed position, and we confirm the item before quoting.
Where a Weft Stop Usually Comes From
- Dirty sensing face - lint and size mist build a film over weeks; the signal margin narrows until the loom stops only on certain yarn lots.
- Fibre run disturbed - a fibre bundle bent tighter than its radius loses light; the sensor is blamed, the bend is the fault.
- Connector not fully seated - the most common cause after any maintenance on the insertion side.
- Amplifier setting moved - a sensitivity set for one yarn count does not serve the next; check the setting before the hardware.
- Sensor position drifting - a loose bracket changes the sensing gap and the same pick reads differently shift to shift.
- Genuine sensor failure - output dead or unstable with the face clean, the fibre sound and the connector proven. Replace only at this point.
Working in that order means the part you replace is the part that was actually faulty - and the loom stays running while you find out.
Quality Standard
- Sensor identity verified against original part number 67699-00004-0B and the item code before packing.
- Sensing face, housing, connector and cable entry inspected on every unit; no cracks, no bent pins, no damaged thread.
- Output signal checked for stability where test facilities apply to the unit.
- Sensing face recessed and sealed so lint cannot lodge directly over the element.
- Housing and connector matched for plug-in replacement, no adaptor required.
- Individually packed with the sensing face shielded and labelled with the original part number; batch recorded.
- Video outgoing inspection can be provided on request before shipment.
- Warranty covers manufacturing defects, assessed case by case. Damage caused by incorrect wiring, wrong supply voltage, oil or water ingress, or physical impact is excluded.

Specifications
| Product | Weft sensor |
| Item Code | HL1242 |
| Original Part Number | 67699-00004-0B |
| Product Type | Weft sensor / weft feeler |
| Function | Weft arrival detection at the insertion side |
| Application | Toyota air jet looms |
| Machine Model | Confirmed per enquiry against the original part number |
| Testing | Identity verified; face, connector and cable inspected; output signal checked where facilities apply |
| HS Code | 8448499000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Individually packed with the sensing face shielded in a neutral export carton; private-label packaging available on request.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: Does this sensor replace 67699-00004-0B directly?
Yes, it is supplied to that original part number. Send your loom model with the enquiry and we confirm the match before quoting.
Q2: The loom keeps stopping on weft. Should I replace the sensor first?
No. Clean the sensing face, check the fibre run and reseat the plug first. Those three checks clear most weft stops at no cost.
Q3: Can I test the sensor before buying a replacement?
Compare the output against a sensor known to work on the same machine, or swap the unit to another position. The fault follows the sensor if the sensor is faulty.
Q4: Do you supply the matching fibre and lens parts?
Yes. Tell us the position and we will list the mating optical parts together with the sensor.
Q5: What about the warranty?
Manufacturing defects are covered case by case. Damage from incorrect wiring, wrong voltage, oil or water ingress or physical impact is not covered.
Send your inquiry directly to us