CABLE JAT710 TOYOTA Air Jet Loom Electrical Connection Cable Part HL1252 Terminated Harness
Product Overview
Electrical connection cable for the Toyota JAT710 air jet loom, supplied under our item code HL1252. The cable is supplied terminated, with the plugs fitted and the length set for the position it serves, so it goes onto the loom as a part rather than as a length of wire to be made up in the workshop.
In a weaving shed a cable is asked to survive three things at once: constant vibration, oil mist from the lubrication system, and handling every time the machine is serviced. The first two attack the insulation and the plug pins slowly; the third finishes the job, usually at the point where the cable is pulled by the plug instead of the body. That is why a cable fault so often looks like a board fault - the failure is inside a plug that still looks sound from the outside.
Applications & Compatibility
- Application: electrical connection cable, Toyota JAT710 air jet loom
- Machine model: JAT710
- Our item code: HL1252
- Original part number: matched per enquiry from your part book, the cable marking, or photographs of both plugs
- Supplied as: terminated cable with plugs fitted, ready to install
- Typical users: weaving mills, loom electrical teams, repair workshops and spare-parts distributors
Please note that more than one cable is used on the same loom and they are not interchangeable. Two cables with the same plug on one end can differ completely at the other. When you enquire, tell us the position the cable serves - display, inverter, servo, sensor or solenoid - and photograph both ends. We confirm the item before quoting so the first shipment is the right one.
Reading a Cable Fault Correctly
- Intermittent, position-dependent faults - a symptom that appears when the loom is running and vanishes when it is stopped is a mechanical fault in an electrical part.
- Faults that move with the harness - flex the cable while watching the signal; if the reading jumps, the cable or its plug is the fault.
- One function affected, its neighbours healthy - a rail or supply fault would take several functions down together; a single function points at its own cable.
- Oil at the plug - oil mist reaches the lowest point of a route first; a plug that is wet inside will fail again unless the routing is corrected.
- Hardened insulation at a clamp - heat and vibration embrittle the cable where it is fixed; that is where the conductor breaks, invisibly.
- Continuity on a stationary machine proves little - test while flexing, and test pin to pin, not end to end only.
Ten minutes with a meter and a hand on the harness settles what an hour of board swapping does not.
Quality Standard
- Cable identity verified against the ordered item code and, where provided, the original part number before packing.
- Pin-to-pin wiring and continuity checked on every unit before packing, with the result recorded.
- Plugs inspected for pin condition, latch integrity and cracked housings; no corrosion accepted.
- Insulation checked along the full length; no cuts, chafe marks, hardening or exposed conductor.
- Length and plug type compared with a reference cable of the same part number.
- Individually bagged with plugs protected, labelled with the item code; batch recorded for traceability.
- Video outgoing inspection can be provided on request before shipment.
- Warranty covers manufacturing defects, assessed case by case. Damage from incorrect routing, abrasion, oil or water ingress, over-tight fitting or handling during maintenance is excluded.

Specifications
| Product | Cable |
| Item Code | HL1252 |
| Product Type | Electrical connection cable |
| Model | JAT710 |
| Application | Toyota JAT710 air jet loom |
| Original Part Number | Matched per enquiry from part book, cable marking or plug photographs |
| Supplied As | Terminated cable with plugs fitted |
| Testing | Pin-to-pin continuity recorded; plugs and insulation inspected |
| HS Code | 8544429000 |
| Place of Origin | Shanghai, China |
Order & Shipping Information
- Minimum order quantity: 2 pieces.
- Sample order is acceptable for quality evaluation.
- Stock items ship within 5 working days after payment confirmation.
- Individually bagged with plugs protected, inside a neutral export carton; private-label packaging available on request.
- Shipping option: DHL / FedEx / UPS express, air freight, sea freight.
- Complete export documents including commercial invoice and packing list will be supplied.
- We ship worldwide to textile markets across Southeast Asia, Central Asia, South America, North America and Europe.

Frequently Asked Questions
Q1: How do I order without an original part number?
Send photographs of both plugs, the approximate length and the position the cable serves. We match it against our stock and confirm before quoting.
Q2: Is this cable the same as other cables for the JAT710?
No. Several cables are used on the same loom with different lengths and different plugs. Order by position and by photograph, not by machine model alone.
Q3: The fault is intermittent - cable or board?
Flex the harness while watching the signal. If the reading reacts to the movement, the cable or plug is at fault; a board does not respond to a hand on the harness.
Q4: How should the new cable be routed?
Follow the original route exactly, keep it clear of hot surfaces and moving parts, and leave slack at the plug so the cable is never pulled by its connector.
Q5: What about the warranty?
Manufacturing defects are covered case by case. Damage from incorrect routing, abrasion, oil or water ingress or handling during maintenance is not covered.
Send your inquiry directly to us